PartsTable
Technical Data Sheet
8022090 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: ALUMINUM, design_type: THREADED, thread_class: 3B, overall_diameter: 1.188 INCHES NOMINAL IN, nondefinitive_spec/std_data: 2 TYPE AND 12 SIZE, departure_from_cited_document: AS MODIFIED BY SURFACE TREATMENT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-034-7950, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8022090
NSN: 5340-00-034-7950
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialALUMINUM
design_typeTHREADED
thread_class3B
overall_diameter1.188 INCHES NOMINAL IN
nondefinitive_spec/std_data2 TYPE AND 12 SIZE
departure_from_cited_documentAS MODIFIED BY SURFACE TREATMENT
thread_size_and_series/type_designator1-1/16-12 UN
NSN5340-00-034-7950
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8022090 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
THREAD CLASS: 3B
DESIGN TYPE: THREADED
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY SURFACE TREATMENT
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 12 SIZE
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1-1/16-12 UN
OVERALL DIAMETER: 1.188 INCHES NOMINAL IN
MATERIAL: ALUMINUM
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS3B
DESIGN TYPETHREADED
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY SURFACE TREATMENT
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 12 SIZE
THREAD SIZE AND SERIES/TYPE DESIGNATOR1-1/16-12 UN
OVERALL DIAMETER1.188 INCHES NOMINAL IN
MATERIALALUMINUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
RS1Upgraded Successor
successor cross-reference
successor
1.0SCUpgraded Successor
successor cross-reference
successor
GCT1.0Upgraded Successor
successor cross-reference
successor
30F62Interchangeable
interchangeable cross-reference
interchangeable
SC12Interchangeable
interchangeable cross-reference
interchangeable
M307530Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8022090?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8022090?
8022090 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 8022090?
There are 18 known substitutes for 8022090: RS1, 1.0SC, GCT1.0 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8022090?
8022090 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-034-7950. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8022090