PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8021562
8021562 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: RECESSED, seal_width: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN, outside_diameter: 3.005 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 3.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-136-2005, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8021562
NSN: 5330-00-136-2005
FSC: 5330
CAGE: 80072 — H20 TANK INC U S MOTORS DIV (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleRECESSED
seal_width0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
outside_diameter3.005 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter3.000 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter1.875 INCHES NOMINAL IN
NSN5330-00-136-2005
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8021562 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 3.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SURFACE TREATMENT: PLASTIC CASE
•
OUTSIDE DIAMETER: 3.005 INCHES NOMINAL IN
•
CASE STYLE: RECESSED
•
SEALING ELEMENT STYLE: VERTICAL
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
HOUSING BORE DIAMETER3.000 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
SURFACE TREATMENTPLASTIC CASE
OUTSIDE DIAMETER3.005 INCHES NOMINAL IN
CASE STYLERECESSED
SEALING ELEMENT STYLEVERTICAL
ACCOMMODATED SHAFT DIAMETER1.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
18823Interchangeable
interchangeable cross-reference
interchangeable
867862R1Interchangeable
interchangeable cross-reference
interchangeable
18823-0Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8021562?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8021562?
8021562 is a SEAL,PLAIN ENCASED.
What parts can replace 8021562?
There are 3 known substitutes for 8021562: 18823, 867862R1, 18823-0. Substitute compatibility should be verified for your specific system.
What is the NSN for 8021562?
8021562 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-136-2005. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8021562

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026