PartsTable
Technical Data Sheet
PartsTable / O-RING / 802-099-6
802-099-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -40.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.217 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN, center_hole_diameter: 0.125 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN, elongation_percentage: 500 MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-582-7040, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
802-099-6
NSN: 5331-00-582-7040
FSC: 5331 — O-RING
CAGE: 83259 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV COMPOSITE SEALING SYSTEMS DIVISION (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
temp_rating-40.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
hardness_rating60.0 SHORE DUROMETER A NOMINAL
outside_diameter0.217 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
center_hole_diameter0.125 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
elongation_percentage500 MAXIMUM
cross-sectional_height0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
NSN5331-00-582-7040
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 802-099-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -40.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 0.217 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.125 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
•
ELONGATION PERCENTAGE: 500 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING60.0 SHORE DUROMETER A NOMINAL
TEMP RATING-40.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER0.217 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.125 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
ELONGATION PERCENTAGE500 MAXIMUM
CROSS-SECTIONAL HEIGHT0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
100365Interchangeable
interchangeable cross-reference
interchangeable
SN74S86NInterchangeable
interchangeable cross-reference
interchangeable
SNC54S86J00Interchangeable
interchangeable cross-reference
interchangeable
CV178102Interchangeable
interchangeable cross-reference
interchangeable
95235131Interchangeable
interchangeable cross-reference
interchangeable
122A23S20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 802-099-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 802-099-6?
802-099-6 is a O-RING.
What parts can replace 802-099-6?
There are 9 known substitutes for 802-099-6: 100365, SN74S86N, SNC54S86J00 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 802-099-6?
802-099-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-582-7040. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 802-099-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026