PartsTable
Technical Data Sheet
Download PDF

801937 — BELLOWS,PROTECTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

801937: BELLOWS,PROTECTION.

The BELLOWS,PROTECTION is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, neutral_length: 2.250 INCHES NOMINAL IN, end_inside_length: 0.188 INCHES NOMINAL IN, end_outside_length: 0.188 INCHES NOMINAL IN, fsc_application_data: CYLINDER,HYDRAULIC BRAKE,VEHICULAR,MASTER, thickness_at_both_ends: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-737-5176, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
801937
NSN: 5340-00-737-5176
FSC: 5340 — Hardware, Commercial
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
neutral_length2.250 INCHES NOMINAL IN
end_inside_length0.188 INCHES NOMINAL IN
end_outside_length0.188 INCHES NOMINAL IN
fsc_application_dataCYLINDER,HYDRAULIC BRAKE,VEHICULAR,MASTER
thickness_at_both_ends0.125 INCHES NOMINAL IN
thickness_between_ends0.047 INCHES NOMINAL IN
large_end_inside_diameter1.000 INCHES NOMINAL IN
small_end_inside_diameter0.438 INCHES NOMINAL IN
large_end_outside_diameter1.562 INCHES NOMINAL IN
small_end_outside_diameter0.688 INCHES NOMINAL IN
NSN5340-00-737-5176
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 801937 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: CYLINDER,HYDRAULIC BRAKE,VEHICULAR,MASTER
•
SMALL END INSIDE DIAMETER: 0.438 INCHES NOMINAL IN
•
LARGE END INSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
LARGE END OUTSIDE DIAMETER: 1.562 INCHES NOMINAL IN
•
SMALL END OUTSIDE DIAMETER: 0.688 INCHES NOMINAL IN
•
NEUTRAL LENGTH: 2.250 INCHES NOMINAL IN
•
END OUTSIDE LENGTH: 0.188 INCHES NOMINAL IN
•
THICKNESS AT BOTH ENDS: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATACYLINDER,HYDRAULIC BRAKE,VEHICULAR,MASTER
SMALL END INSIDE DIAMETER0.438 INCHES NOMINAL IN
LARGE END INSIDE DIAMETER1.000 INCHES NOMINAL IN
LARGE END OUTSIDE DIAMETER1.562 INCHES NOMINAL IN
SMALL END OUTSIDE DIAMETER0.688 INCHES NOMINAL IN
NEUTRAL LENGTH2.250 INCHES NOMINAL IN
END OUTSIDE LENGTH0.188 INCHES NOMINAL IN
THICKNESS AT BOTH ENDS0.125 INCHES NOMINAL IN
THICKNESS BETWEEN ENDS0.047 INCHES NOMINAL IN
END INSIDE LENGTH0.188 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
1123185C1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
7375176Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 801937?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 801937?
801937 is a BELLOWS,PROTECTION.
What parts can replace 801937?
There are 2 known substitutes for 801937: 1123185C1, 7375176. Substitute compatibility should be verified for your specific system.
What is the NSN for 801937?
801937 is cataloged in the U.S. Government catalog under NSN 5340-00-737-5176. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 801937