PartsTable
Technical Data Sheet
PartsTable / O-RING / 8013603
8013603 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, center_hole_diameter: 1.967 INCHES MINIMUM AND 2.007 INCHES MAXIMUM IN, cross-sectional_height: 0.099 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-073-8165, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8013603
NSN: 5331-00-073-8165
FSC: 5331 — O-RING
CAGE: 93835 — PARKER HANNIFIN CORPORATION DIV HYDRAULIC SYSTEMS DIVISION (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
center_hole_diameter1.967 INCHES MINIMUM AND 2.007 INCHES MAXIMUM IN
cross-sectional_height0.099 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
NSN5331-00-073-8165
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8013603 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CROSS-SECTIONAL HEIGHT: 0.099 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.967 INCHES MINIMUM AND 2.007 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER FLUOROCARBON CLASS FPM
CROSS-SECTIONAL HEIGHT0.099 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.967 INCHES MINIMUM AND 2.007 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
SM-B-187130Interchangeable
interchangeable cross-reference
interchangeable
BP17724Interchangeable
interchangeable cross-reference
interchangeable
56552Interchangeable
interchangeable cross-reference
interchangeable
MS17413-136Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8013603?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8013603?
8013603 is a O-RING.
What parts can replace 8013603?
There are 4 known substitutes for 8013603: SM-B-187130, BP17724, 56552 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8013603?
8013603 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-073-8165. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8013603

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026