PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 801252
801252 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, head_diameter: 13.4 MILLIMETERS NOMINAL MM, fastener_length: 23.0 MILLIMETERS NOMINAL MM, thread_direction: RIGHT-HAND, width_across_flats: 4.0 MILLIMETERS NOMINAL MM, internal_drive_style: HEXAGON. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-268-5897, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
801252
NSN: 5340-01-268-5897
FSC: 5340
CAGE: C5152 — TELEROB GESELLSCHAFT FUR FERNHANTIERUNGSTECHNIK MBH DIV MAK SYSTEM GESELLSCHAFT MBH (DEU)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
head_diameter13.4 MILLIMETERS NOMINAL MM
fastener_length23.0 MILLIMETERS NOMINAL MM
thread_directionRIGHT-HAND
width_across_flats4.0 MILLIMETERS NOMINAL MM
internal_drive_styleHEXAGON
end_item_identification5820-01-572-8269
nominal_thread_diameter6.0 MILLIMETERS MM
thread_series_designatorM
thread_pitch_in_millimeters1.0
part_name_assigned_by_controlling_agencySCREW M6X23
NSN5340-01-268-5897
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 801252 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.960 INCHES NOMINAL IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.750 INCHES NOMINAL IN
•
INSIDE DIAMETER LENGTH: 0.500 INCHES NOMINAL IN
•
DESIGN TYPE: FRICTION
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER0.960 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR RED
MATERIALPLASTIC, POLYETHYLENE (PP)
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.750 INCHES NOMINAL IN
INSIDE DIAMETER LENGTH0.500 INCHES NOMINAL IN
DESIGN TYPEFRICTION
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
70205Upgraded Successor
successor cross-reference
successor
SAE-AS85049/138Upgraded Successor
successor cross-reference
successor
5M0B009865Upgraded Successor
successor cross-reference
successor
23417Interchangeable
interchangeable cross-reference
interchangeable
12576PC4Interchangeable
interchangeable cross-reference
interchangeable
S-34101Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 801252?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 801252?
801252 is a SCREW,MACHINE.
What parts can replace 801252?
There are 12 known substitutes for 801252: 70205, SAE-AS85049/138, 5M0B009865 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 801252?
801252 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-268-5897. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 801252

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026