PartsTable
Technical Data Sheet
Download PDF

801069PC122 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

801069PC122: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND COPPER OVERALL, outside_diameter: 1.438 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 1.000 INCHES NOMINAL IN, maximum_pressure_rating: 200.0 POUNDS PER SQUARE INCH (PSI) LBS, cross-sectional_thickness: 0.078 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-199-5811, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
801069PC122
NSN: 5330-00-199-5811
FSC: 5330 — Packing and Gasket Materials
CAGE: 21444 — REXNORD INDUSTRIES LLC (USA)
SPECIFICATIONS
materialASBESTOS AND COPPER OVERALL
outside_diameter1.438 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter1.000 INCHES NOMINAL IN
maximum_pressure_rating200.0 POUNDS PER SQUARE INCH (PSI) LBS
cross-sectional_thickness0.078 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL WITH SOFT FILLER
nondefinitive_spec/std_data1 TYPE
NSN5330-00-199-5811
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 801069PC122 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.078 INCHES NOMINAL IN
•
MAXIMUM PRESSURE RATING: 200.0 POUNDS PER SQUARE INCH (PSI) LBS
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: METAL WITH SOFT FILLER
•
OUTSIDE DIAMETER: 1.438 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.000 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
•
MATERIAL: ASBESTOS AND COPPER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.078 INCHES NOMINAL IN
MAXIMUM PRESSURE RATING200.0 POUNDS PER SQUARE INCH (PSI) LBS
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLEMETAL WITH SOFT FILLER
OUTSIDE DIAMETER1.438 INCHES NOMINAL IN
APERTURE DIAMETER1.000 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1 TYPE
MATERIALASBESTOS AND COPPER OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
10521Reference document
Same NSN cross-reference
Reference document — Secondary reference
HHG101TYPE1Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
HAZMAT per U.S. Government catalogNo demilitarization required
Ready to buy 801069PC122?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 801069PC122?
801069PC122 is a GASKET.
What parts can replace 801069PC122?
There are 2 known substitutes for 801069PC122: 10521, HHG101TYPE1. Substitute compatibility should be verified for your specific system.
What is the NSN for 801069PC122?
801069PC122 is cataloged in the U.S. Government catalog under NSN 5330-00-199-5811. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 801069PC122