PartsTable
Technical Data Sheet
Download PDF

801-6641184FNA6 — GEAR,SPUR

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

801-6641184FNA6: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, body_style: PLAIN, SOLID, bore_style: STRAIGHT SPLINE BOTH ENDS, pitch_diameter: 2.0000 INCHES NOMINAL IN, pressure_angle: 14.5000 DEGREES, teeth_quantity: 16. This part is cataloged in the U.S.

Government catalog under NSN 3020-01-375-8145, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
801-6641184FNA6
NSN: 3020-01-375-8145
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
body_stylePLAIN, SOLID
bore_styleSTRAIGHT SPLINE BOTH ENDS
pitch_diameter2.0000 INCHES NOMINAL IN
pressure_angle14.5000 DEGREES
teeth_quantity16
spline_quantity10 BOTH ENDS
special_featuresSPLINED BORE HAS 1 TOOTH REMOVED
style_designatorPROTRUDING HUBS
face_nominal_width1.061 INCHES IN
hub_nominal_diameter1.372 INCHES BOTH ENDS IN
hub_style_designatorPLAIN BOTH ENDS
NSN3020-01-375-8145
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEAR,SPUR TITLE COMPONENT PN 801-6641184FNA6 MFR GEAR,SPUR
KEY FEATURES
•
BORE NOMINAL DIAMETER: 0.750 INCHES BOTH ENDS IN
•
HUB NOMINAL DIAMETER: 1.372 INCHES BOTH ENDS IN
•
TEETH QUANTITY: 16
•
BODY STYLE: PLAIN, SOLID
•
BORE STYLE: STRAIGHT SPLINE BOTH ENDS
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.560 INCHES BOTH ENDS IN
•
STYLE DESIGNATOR: PROTRUDING HUBS
•
PITCH DIAMETER: 2.0000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BORE NOMINAL DIAMETER0.750 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER1.372 INCHES BOTH ENDS IN
TEETH QUANTITY16
BODY STYLEPLAIN, SOLID
BORE STYLESTRAIGHT SPLINE BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.560 INCHES BOTH ENDS IN
STYLE DESIGNATORPROTRUDING HUBS
PITCH DIAMETER2.0000 INCHES NOMINAL IN
HUB STYLE DESIGNATORPLAIN BOTH ENDS
SPLINE QUANTITY10 BOTH ENDS
SUBSTITUTES & CROSS-REFERENCES 2
264393055-A6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
6641184Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 801-6641184FNA6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 801-6641184FNA6?
801-6641184FNA6 is a GEAR,SPUR.
What parts can replace 801-6641184FNA6?
There are 2 known substitutes for 801-6641184FNA6: 264393055-A6, 6641184. Substitute compatibility should be verified for your specific system.
What is the NSN for 801-6641184FNA6?
801-6641184FNA6 is cataloged in the U.S. Government catalog under NSN 3020-01-375-8145. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 801-6641184FNA6