PartsTable
Technical Data Sheet
Download PDF

800H-DR6JA4 — SWITCH,PUSH

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

800H-DR6JA4: SWITCH,PUSH.

The SWITCH,PUSH is a the manufacturer industrial component. Key specifications include body_style: HOLE MOUNT, body_height: 3.469 INCHES NOMINAL IN, body_diameter: 2.188 INCHES NOMINAL IN, inclosure_type: HERMETICALLY SEALED, mounting_method: PANEL, end_item_identification: CONTROL STATION FLIGHT DECK RAMP DOOR 176485. This part is cataloged in the U.S.

Government catalog under NSN 5930-01-511-8214, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
800H-DR6JA4
NSN: 5930-01-511-8214
FSC: 5930 — Switches
CAGE: 01121 — ROCKWELL AUTOMATION, INC. DBA ROCKWELL AUTOMATION (USA)
SPECIFICATIONS
body_styleHOLE MOUNT
body_height3.469 INCHES NOMINAL IN
body_diameter2.188 INCHES NOMINAL IN
inclosure_typeHERMETICALLY SEALED
mounting_methodPANEL
special_featuresSWITCH BODY IS SAME AS NSN 5930-01-505-8738, BUT THE CONTACTS ARE NORMALLY CLOSED WITH THIS SWITCH; SWITCH HAS RED JUMBO MUSHROOM SHAPED ACTUATOR
end_item_identificationCONTROL STATION FLIGHT DECK RAMP DOOR 176485
terminal_type_and_quantity6 SCREW
maximum_voltage_rating_in_volts600.0 AC
unthreaded_mounting_hole_diameter2.031 INCHES NOMINAL IN
contact_load_current_rating_at_maximum_rated_voltage10.000 AMPERES RESISTIVE AC
center_to_center_distance_between_mounting_facilities_parallel_to_diameter1.625 INCHES NOMINAL IN
NSN5930-01-511-8214
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available SWITCH,PUSH TITLE COMPONENT PN 800H-DR6JA4 MFR SWITCH,PUSH
KEY FEATURES
•
BODY DIAMETER: 2.188 INCHES NOMINAL IN
•
INCLOSURE TYPE: HERMETICALLY SEALED
•
BODY STYLE: HOLE MOUNT
•
MOUNTING METHOD: PANEL
•
BODY HEIGHT: 3.469 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO DIAMETER: 1.625 INCHES NOMINAL IN
•
UNTHREADED MOUNTING HOLE DIAMETER: 2.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BODY DIAMETER2.188 INCHES NOMINAL IN
INCLOSURE TYPEHERMETICALLY SEALED
BODY STYLEHOLE MOUNT
MOUNTING METHODPANEL
BODY HEIGHT3.469 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO DIAMETER1.625 INCHES NOMINAL IN
UNTHREADED MOUNTING HOLE DIAMETER2.031 INCHES NOMINAL IN
SPECIAL FEATURESSWITCH BODY IS SAME AS NSN 5930-01-505-8738, BUT THE CONTACTS ARE NORMALLY CLOSED WITH THIS SWITCH; SWITCH HAS RED JUMBO MUSHROOM SHAPED ACTUATOR
MAXIMUM VOLTAGE RATING IN VOLTS600.0 AC
END ITEM IDENTIFICATIONCONTROL STATION FLIGHT DECK RAMP DOOR 176485
SUBSTITUTES & CROSS-REFERENCES 2
20739005 REV J FN 13Reference document
Same NSN cross-reference
Reference document — Secondary reference
176575Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 800H-DR6JA4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 800H-DR6JA4?
800H-DR6JA4 is a SWITCH,PUSH.
What parts can replace 800H-DR6JA4?
There are 2 known substitutes for 800H-DR6JA4: 20739005 REV J FN 13, 176575. Substitute compatibility should be verified for your specific system.
What is the NSN for 800H-DR6JA4?
800H-DR6JA4 is cataloged in the U.S. Government catalog under NSN 5930-01-511-8214. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 800H-DR6JA4