PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 800E1780
800E1780 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LATCH,RIM is a the manufacturer industrial component. Key specifications include width: 2.000 INCHES NOMINAL IN, height: 3.375 INCHES NOMINAL IN, material: STEEL CASE, bolt_type: SINGLE BEVEL NONREVERSIBLE, action_type: SPRING, surface_treatment: CADMIUM CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-310-4600, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
800E1780
NSN: 5340-00-310-4600
FSC: 5340
CAGE: 02413 — KERSEY / AMERICAN LAFRANCE A DIV OF FIGGIE INTERNATIONAL INC (USA)
SPECIFICATIONS
width2.000 INCHES NOMINAL IN
height3.375 INCHES NOMINAL IN
materialSTEEL CASE
bolt_typeSINGLE BEVEL NONREVERSIBLE
action_typeSPRING
special_featuresHOLE DIAMETER:0.205 IN.;CASE SHAPE:RECTANGULAR;HOLE SPACING:3 HOLES ALONG EACH END OF CASE SPACED 0.625 IN. C TO C;CASE THICKNESS:0.640 IN.THK IN
surface_treatmentCADMIUM CASE
mounting_hole_quantity6
NSN5340-00-310-4600
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 800E1780 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACTION TYPE: SPRING
•
MOUNTING HOLE QUANTITY: 6
•
HEIGHT: 3.375 INCHES NOMINAL IN
•
WIDTH: 2.000 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM CASE
•
MATERIAL: STEEL CASE
•
BOLT TYPE: SINGLE BEVEL NONREVERSIBLE
TECHNICAL CHARACTERISTICS (FLIS)
ACTION TYPESPRING
MOUNTING HOLE QUANTITY6
HEIGHT3.375 INCHES NOMINAL IN
WIDTH2.000 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM CASE
MATERIALSTEEL CASE
SPECIAL FEATURESHOLE DIAMETER:0.205 IN.;CASE SHAPE:RECTANGULAR;HOLE SPACING:3 HOLES ALONG EACH END OF CASE SPACED 0.625 IN. C TO C;CASE THICKNESS:0.640 IN.THK IN
BOLT TYPESINGLE BEVEL NONREVERSIBLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
SC6461Interchangeable
interchangeable cross-reference
interchangeable
N1275Interchangeable
interchangeable cross-reference
interchangeable
C6498Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 800E1780?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 800E1780?
800E1780 is a LATCH,RIM.
What parts can replace 800E1780?
There are 3 known substitutes for 800E1780: SC6461, N1275, C6498. Substitute compatibility should be verified for your specific system.
What is the NSN for 800E1780?
800E1780 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-310-4600. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 800E1780

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026