PartsTable
Technical Data Sheet
PartsTable / O-RING / 80097
80097 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HEAD GUIDE,VALVE RELIEF is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: CASE,ELECTRICAL EQUIPMENT CABINET. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-061-3262, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
80097
NSN: 5331-01-061-3262
FSC: 5331 — O-RING
CAGE: 08915 — TUTHILL CORP FILL-RITE DIV (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyCASE,ELECTRICAL EQUIPMENT CABINET
NSN5331-01-061-3262
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 80097 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 330 MAXIMUM
•
TEMP RATING: -35.0 FAHRENHEIT AND 212.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 0.063 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.275 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.149 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE330 MAXIMUM
TEMP RATING-35.0 FAHRENHEIT AND 212.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER0.063 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.275 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.149 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
2021801341M PIECE 8Interchangeable
interchangeable cross-reference
interchangeable
7463.001.130Interchangeable
interchangeable cross-reference
interchangeable
22322914Interchangeable
interchangeable cross-reference
interchangeable
80097Interchangeable
interchangeable cross-reference
interchangeable
N0497 5-106Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 80097?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 80097?
80097 is a HEAD GUIDE,VALVE RELIEF.
What parts can replace 80097?
There are 5 known substitutes for 80097: 2021801341M PIECE 8, 7463.001.130, 22322914 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 80097?
80097 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-061-3262. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 80097

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026