PartsTable
Technical Data Sheet
Download PDF

80086103 — ACTUATING,LEVER,STEERING GEAR,VE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

80086103: ACTUATING,LEVER,STEERING GEAR,VE.

ACTUATING,LEVER,STEERING GEAR,VE. Key specifications include material: STEEL OVERALL, nut_style: CLINCHCLINCH, nut_height: 0.100 INCHES NOMINAL0.100 INCHES NOMINAL IN, nut_diameter: 0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN, pilot_length: 0.038 INCHES MAXIMUM0.038 INCHES MAXIMUM IN, thread_class: 2B2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-141-1813, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
80086103
NSN: 5310-00-141-1813
NIINs: 001411813, 016675200
FSC: 5310 — Nuts and Washers
CAGE: 06481 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleCLINCHCLINCH
nut_height0.100 INCHES NOMINAL0.100 INCHES NOMINAL IN
nut_diameter0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
pilot_length0.038 INCHES MAXIMUM0.038 INCHES MAXIMUM IN
thread_class2B2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)UNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.165 INCHES MAXIMUM0.165 INCHES MAXIMUM IN
thread_directionRIGHT-HANDRIGHT-HAND
surface_treatmentCADMIUM OVERALLCADMIUM OVERALL
nominal_thread_size0.112 INCHES0.112 INCHES IN
thread_quantity_per_inch4040
NSN5310-00-141-1813
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 80086103 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALLQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HANDRIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES0.112 INCHES IN
•
NUT DIAMETER: 0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
•
PILOT DIAMETER: 0.165 INCHES MAXIMUM0.165 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.038 INCHES MAXIMUM0.038 INCHES MAXIMUM IN
•
NUT HEIGHT: 0.100 INCHES NOMINAL0.100 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALLQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)UNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HANDRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES0.112 INCHES IN
NUT DIAMETER0.250 INCHES NOMINAL0.250 INCHES NOMINAL IN
PILOT DIAMETER0.165 INCHES MAXIMUM0.165 INCHES MAXIMUM IN
PILOT LENGTH0.038 INCHES MAXIMUM0.038 INCHES MAXIMUM IN
NUT HEIGHT0.100 INCHES NOMINAL0.100 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALLCADMIUM OVERALL
NUT STYLECLINCHCLINCH
SUBSTITUTES & CROSS-REFERENCES 9
12Z5005-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
838344-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
CL440-1CReference document
Same NSN cross-reference
Reference document — Secondary reference
8858336-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
HC861H38-0440Reference document
Same NSN cross-reference
Reference document — Secondary reference
334-0062-000Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 80086103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 80086103?
80086103 is a ACTUATING,LEVER,STEERING GEAR,VE.
What parts can replace 80086103?
There are 9 known substitutes for 80086103: 12Z5005-4, 838344-1, CL440-1C and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 80086103?
80086103 is cataloged in the U.S. Government catalog under NSN 5310-00-141-1813. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 80086103

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.