PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 800832
800832 ✓ Verified by PartsTable
MEGABLEU · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a MEGABLEU industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.022 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN, hole_diameter: 0.675 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN, overall_diameter: 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-088-5355, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
800832
NSN: 5310-01-088-5355
FSC: 5310
CAGE: 1LW55 — BORGWARNER PDS (ANDERSON), L.L.C. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.022 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
hole_diameter0.675 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN
overall_diameter1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-088-5355
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 800832 · MEGABLEU ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
OVERALL DIAMETER: 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
THICKNESS: 0.022 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.675 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
OVERALL DIAMETER1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.022 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
HOLE DIAMETER0.675 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN
CENTER HOLE SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
10333Interchangeable
interchangeable cross-reference
interchangeable
24855FXInterchangeable
interchangeable cross-reference
interchangeable
5HB120Interchangeable
interchangeable cross-reference
interchangeable
45232Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 800832?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 800832?
800832 is a WASHER,FLAT manufactured by MEGABLEU.
What parts can replace 800832?
There are 4 known substitutes for 800832: 10333, 24855FX, 5HB120 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 800832?
800832 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-088-5355. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 800832

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026