800705 — TUMBLER,DRYER

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

800705: TUMBLER,DRYER.

The TUMBLER,DRYER is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ, temp_rating: -100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.792 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-118-8627, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

800705

NSN: 5331-01-118-8627
NIINs: 011188627, 011800192, 016151142
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

material	RUBBER FLUOROSILICONE CLASS FQ
temp_rating	-100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
hardness_rating	60.0 SHORE DUROMETER A NOMINAL
center_hole_diameter	0.792 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_item_identification	AMERICAN DRYER CORP. MODEL AD-50 DRYING TUMBLER
general_characteristics_item_description	50 LB CAPACITY LBS
NSN	5331-01-118-8627

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.792 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROSILICONE CLASS FQ

TECHNICAL CHARACTERISTICS

TEMP RATING	-100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING	60.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.792 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROSILICONE CLASS FQ

SUBSTITUTES & CROSS-REFERENCES 10

8019-70156AReference document

Same NSN cross-reference

Reference document — Secondary reference

AJ60-57Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

2-019L449-65Reference document

Same NSN cross-reference

Reference document — Secondary reference

A-19TH1047Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MIL-DTL-25988/3Reference document

Same NSN cross-reference

Reference document — Identification reference

MIL-R-25988/3Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 800705?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 800705?

800705 is a TUMBLER,DRYER.

What parts can replace 800705?

There are 10 known substitutes for 800705: 8019-70156A, AJ60-57, 2-019L449-65 and 7 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 800705?

800705 is cataloged in the U.S. Government catalog under NSN 5331-01-118-8627. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

800705 — TUMBLER,DRYER

Request a Quote — 800705