PartsTable
Technical Data Sheet
Download PDF

8007-2547-1 — NUT STRIP

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

8007-2547-1: NUT STRIP.

The NUT STRIP is a the manufacturer industrial component. Key specifications include nut_style: STRIP, nut_width: 0.250 INCHES NOMINAL IN, nut_length: 3.620 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), special_features: THREE DRILLED HOLES 0.140 IN. DIA IN.

This part is cataloged in the U.S. Government catalog under NSN 5310-01-219-9129, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8007-2547-1
NSN: 5310-01-219-9129
FSC: 5310 — Nuts and Washers
CAGE: 06401 — L3 TECHNOLOGIES, INC. DBA COMMUNICATION SYSTEMS-WEST DIV COMMUNICATION SYSTEMS-WEST (USA)
SPECIFICATIONS
nut_styleSTRIP
nut_width0.250 INCHES NOMINAL IN
nut_length3.620 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
special_featuresTHREE DRILLED HOLES 0.140 IN. DIA IN
thread_directionRIGHT-HAND
aperture_quantity2
surface_treatmentCHROMATE OVERALL
material_thickness0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
nominal_thread_size0.112 INCHES IN
thread_quantity_per_inch40
NSN5310-01-219-9129
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8007-2547-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT WIDTH: 0.250 INCHES NOMINAL IN
•
NUT LENGTH: 3.620 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
APERTURE QUANTITY: 2
•
MATERIAL THICKNESS: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
TECHNICAL CHARACTERISTICS
NUT WIDTH0.250 INCHES NOMINAL IN
NUT LENGTH3.620 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
APERTURE QUANTITY2
MATERIAL THICKNESS0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
SPECIAL FEATURESTHREE DRILLED HOLES 0.140 IN. DIA IN
SURFACE TREATMENTCHROMATE OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8007-2547-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8007-2547-1?
8007-2547-1 is a NUT STRIP.
What is the NSN for 8007-2547-1?
8007-2547-1 is cataloged in the U.S. Government catalog under NSN 5310-01-219-9129. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8007-2547-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.