PartsTable
Technical Data Sheet
PartsTable / MRO / 800604
800604 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,VARIABLE,AIR DIELECTRI. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: ROUND, nut_diameter: 0.306 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN, shaft_length: 0.718 INCHES NOMINAL SINGLE SHAFT IN, thread_class: 2B, nut_thickness: 0.1645 INCHES MINIMUM AND 0.1705 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-208-3364, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 800604
NSN: 5310-00-208-3364
FSC: 5310
CAGE: 06141 — L3 AVIATION PRODUCTS, INC. DBA L3 TECHNOLOGIES (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleROUND
nut_diameter0.306 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
shaft_length0.718 INCHES NOMINAL SINGLE SHAFT IN
thread_class2B
nut_thickness0.1645 INCHES MINIMUM AND 0.1705 INCHES MAXIMUM IN
overall_width1.000 INCHES NOMINAL IN
terminal_typeWIRE LEAD
thread_seriesUNIFIED NATIONAL COARSE (UNC)
inclosure_typeUNINCLOSED
overall_height1.000 INCHES NOMINAL IN
overall_length7.030 INCHES NOMINAL IN
NSN5310-00-208-3364
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 800604 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT THICKNESS: 0.1645 INCHES MINIMUM AND 0.1705 INCHES MAXIMUM IN
•
DRIVE POINT WIDTH: 0.050 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD QUANTITY PER INCH: 32
•
DRIVE POINT DEPTH: 0.060 INCHES NOMINAL IN
•
THREAD CLASS: 2B
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
NUT THICKNESS0.1645 INCHES MINIMUM AND 0.1705 INCHES MAXIMUM IN
DRIVE POINT WIDTH0.050 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH32
DRIVE POINT DEPTH0.060 INCHES NOMINAL IN
THREAD CLASS2B
NUT DIAMETER0.306 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
NUT STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
GS839DV3Interchangeable
interchangeable cross-reference
interchangeable
8-006-10Interchangeable
interchangeable cross-reference
interchangeable
550-066Interchangeable
interchangeable cross-reference
interchangeable
S80064Interchangeable
interchangeable cross-reference
interchangeable
800604Interchangeable
interchangeable cross-reference
interchangeable
11-00186-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 800604?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 800604?
800604 is a CAPACITOR,VARIABLE,AIR DIELECTRI. It is classified as a MRO (MRO_GENERAL).
What parts can replace 800604?
There are 7 known substitutes for 800604: GS839DV3, 8-006-10, 550-066 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 800604?
800604 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-208-3364. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 800604

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026