PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 800524PC38
800524PC38 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 6.2500 INCHES NOMINAL IN, bore_diameter: 6.3750 INCHES NOMINAL IN, overall_width: 8.3750 INCHES NOMINAL IN, standout_width: 1.0625 INCHES NOMINAL IN, special_features: W/TWO SPACERS,HOLE AND GROOVE IN CUP SPACER WHICH PROTRUDES BEYOND CUP OD. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-9559, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
800524PC38
NSN: 3110-00-151-9559
FSC: 3110
CAGE: 21444 — REXNORD INDUSTRIES LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width6.2500 INCHES NOMINAL IN
bore_diameter6.3750 INCHES NOMINAL IN
overall_width8.3750 INCHES NOMINAL IN
standout_width1.0625 INCHES NOMINAL IN
special_featuresW/TWO SPACERS,HOLE AND GROOVE IN CUP SPACER WHICH PROTRUDES BEYOND CUP OD
style_designatorSTRAIGHT BORE, DOUBLE CUP, SINGLE CONES, STEEP ANGLE
cone_corner_radius0.2500 INCHES NOMINAL IN
backface_corner_radius0.0620 INCHES NOMINAL IN
overall_outside_diameter14.7500 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-151-9559
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 800524PC38 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDOUT WIDTH: 1.0625 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 14.7500 INCHES NOMINAL IN
•
CUP WIDTH: 6.2500 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.2500 INCHES NOMINAL IN
•
BORE DIAMETER: 6.3750 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDOUT WIDTH1.0625 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER14.7500 INCHES NOMINAL IN
CUP WIDTH6.2500 INCHES NOMINAL IN
CONE CORNER RADIUS0.2500 INCHES NOMINAL IN
BORE DIAMETER6.3750 INCHES NOMINAL IN
OVERALL WIDTH8.3750 INCHES NOMINAL IN
SPECIAL FEATURESW/TWO SPACERS,HOLE AND GROOVE IN CUP SPACER WHICH PROTRUDES BEYOND CUP OD
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORSTRAIGHT BORE, DOUBLE CUP, SINGLE CONES, STEEP ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
2-158Interchangeable
interchangeable cross-reference
interchangeable
332525Interchangeable
interchangeable cross-reference
interchangeable
861814Interchangeable
interchangeable cross-reference
interchangeable
215BInterchangeable
interchangeable cross-reference
interchangeable
6494Interchangeable
interchangeable cross-reference
interchangeable
E121208Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 800524PC38?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 800524PC38?
800524PC38 is a BEARING,ROLLER,TAPERED.
What parts can replace 800524PC38?
There are 25 known substitutes for 800524PC38: 2-158, 332525, 861814 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 800524PC38?
800524PC38 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-9559. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 800524PC38

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026