PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 800513PC44
800513PC44 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 1.000 INCHES NOMINAL IN, outside_diameter: 10.633 INCHES NOMINAL IN, housing_bore_diameter: 10.625 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-222-2454, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
800513PC44
NSN: 5330-00-222-2454
FSC: 5330
CAGE: 21444 — REXNORD INDUSTRIES LLC (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width1.000 INCHES NOMINAL IN
outside_diameter10.633 INCHES NOMINAL IN
housing_bore_diameter10.625 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter8.625 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-222-2454
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 800513PC44 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 10.625 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 10.633 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 8.625 INCHES NOMINAL IN
•
SEAL WIDTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
HOUSING BORE DIAMETER10.625 INCHES NOMINAL IN
MATERIALSTEEL CASE
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER10.633 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER8.625 INCHES NOMINAL IN
SEAL WIDTH1.000 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
E1200-1-2Interchangeable
interchangeable cross-reference
interchangeable
29894Interchangeable
interchangeable cross-reference
interchangeable
R1134EAInterchangeable
interchangeable cross-reference
interchangeable
65452Interchangeable
interchangeable cross-reference
interchangeable
1134EAInterchangeable
interchangeable cross-reference
interchangeable
10820Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 800513PC44?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 800513PC44?
800513PC44 is a SEAL,PLAIN ENCASED.
What parts can replace 800513PC44?
There are 24 known substitutes for 800513PC44: E1200-1-2, 29894, R1134EA and 21 more. Substitute compatibility should be verified for your specific system.
Is 800513PC44 still available?
800513PC44 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 800513PC44

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026