PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 800513PC43
800513PC43 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, outside_diameter: 5.004 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 4.999 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2313, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
800513PC43
NSN: 5330-00-641-2313
FSC: 5330
CAGE: 21444 — REXNORD INDUSTRIES LLC (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
outside_diameter5.004 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter4.999 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter4.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-641-2313
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 800513PC43 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
SURFACE TREATMENT: PLASTIC CASE
•
OUTSIDE DIAMETER: 5.004 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
HOUSING BORE DIAMETER: 4.999 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 4.000 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
CASE STYLESQUARE
SURFACE TREATMENTPLASTIC CASE
OUTSIDE DIAMETER5.004 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER4.999 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER4.000 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
HRJInterchangeable
interchangeable cross-reference
interchangeable
155020AInterchangeable
interchangeable cross-reference
interchangeable
6240PL0940652Interchangeable
interchangeable cross-reference
interchangeable
13100016Interchangeable
interchangeable cross-reference
interchangeable
3593-9586-00Interchangeable
interchangeable cross-reference
interchangeable
5935PL0820219Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 800513PC43?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 800513PC43?
800513PC43 is a SEAL,PLAIN ENCASED.
What parts can replace 800513PC43?
There are 26 known substitutes for 800513PC43: HRJ, 155020A, 6240PL0940652 and 23 more. Substitute compatibility should be verified for your specific system.
Is 800513PC43 still available?
800513PC43 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 800513PC43

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026