PartsTable
Technical Data Sheet
PartsTable / MRO / 800168
800168 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: PLASTIC CASE, body_style: RECTANGULAR, body_width: 0.170 INCHES NOMINAL IN, body_height: 0.310 INCHES NOMINAL IN, body_length: 0.750 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-271-0006, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 800168
NSN: 3110-00-271-0006
FSC: 3110
CAGE: 24047 — COOPER INDUSTRIES INC DBA COOPER TOOLS (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleRECTANGULAR
body_width0.170 INCHES NOMINAL IN
body_height0.310 INCHES NOMINAL IN
body_length0.750 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
shaft_length0.130 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter0.156 INCHES MAXIMUM IN
bore_diameter0.7500 INCHES NOMINAL IN
overall_width0.3750 INCHES NOMINAL IN
alignment_typeRIGID
NSN3110-00-271-0006
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 800168 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.0000 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
LUBRICATION MATERIAL: LUBRICANT
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 0.7500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER1.0000 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
LUBRICATION MATERIALLUBRICANT
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
OVERALL WIDTH0.3750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
B-12-6Interchangeable
interchangeable cross-reference
interchangeable
B12BLUEInterchangeable
interchangeable cross-reference
interchangeable
B-126-OHInterchangeable
interchangeable cross-reference
interchangeable
9421529Interchangeable
interchangeable cross-reference
interchangeable
800168Interchangeable
interchangeable cross-reference
interchangeable
2403Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 800168?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 800168?
800168 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 800168?
There are 13 known substitutes for 800168: B-12-6, B12BLUE, B-126-OH and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 800168?
800168 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-271-0006. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 800168

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026