PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 800-601-10
800-601-10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, construction: TWO-PIECE, outside_diameter: 0.438 INCHES NOMINAL IN, surface_treatment: CADMIUM RETAINER, retainer_thickness: 0.040 INCHES NOMINAL IN, packing_inside_diameter: 0.176 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-257-0872, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
800-601-10
NSN: 5330-00-257-0872
FSC: 5330
CAGE: C0308 — PARKER HANNIFIN GMBH O-RING DIVISION (DEU)
SPECIFICATIONS
materialSTEEL RETAINER
constructionTWO-PIECE
outside_diameter0.438 INCHES NOMINAL IN
surface_treatmentCADMIUM RETAINER
retainer_thickness0.040 INCHES NOMINAL IN
packing_inside_diameter0.176 INCHES NOMINAL IN
retainer_inside_diameter0.274 INCHES NOMINAL IN
material_document_and_classificationAMS 3304 ASSN STD SINGLE MATERIAL RESPONSE PACKING
packing_ring_cross-sectional_diameter0.050 INCHES NOMINAL IN
NSN5330-00-257-0872
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 800-601-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONSTRUCTION: TWO-PIECE
•
SURFACE TREATMENT: CADMIUM RETAINER
•
FSC APPLICATION DATA: GENERAL PURPOSE USE
•
MATERIAL: STEEL RETAINER
•
OUTSIDE DIAMETER: 0.438 INCHES NOMINAL IN
•
RETAINER THICKNESS: 0.040 INCHES NOMINAL IN
•
PACKING INSIDE DIAMETER: 0.176 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CONSTRUCTIONTWO-PIECE
SURFACE TREATMENTCADMIUM RETAINER
FSC APPLICATION DATAGENERAL PURPOSE USE
MATERIALSTEEL RETAINER
OUTSIDE DIAMETER0.438 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC PACKING
RETAINER THICKNESS0.040 INCHES NOMINAL IN
PACKING INSIDE DIAMETER0.176 INCHES NOMINAL IN
PACKING RING CROSS-SECTIONAL DIAMETER0.050 INCHES NOMINAL IN
RETAINER INSIDE DIAMETER0.276 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
800-601-10Interchangeable
interchangeable cross-reference
interchangeable
620100500Interchangeable
interchangeable cross-reference
interchangeable
9001495Interchangeable
interchangeable cross-reference
interchangeable
548ST22NInterchangeable
interchangeable cross-reference
interchangeable
254AInterchangeable
interchangeable cross-reference
interchangeable
800-601-10 3-160SInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 800-601-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 800-601-10?
800-601-10 is a PACKING WITH RETAINER.
What parts can replace 800-601-10?
There are 7 known substitutes for 800-601-10: 800-601-10, 620100500, 9001495 and 4 more. Substitute compatibility should be verified for your specific system.
Is 800-601-10 still available?
800-601-10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 800-601-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026