PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 800-530-1/4
800-530-1/4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 800-530-1/4 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-585-8040, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
800-530-1/4
NSN: 5330-00-585-8040
FSC: 5330
CAGE: 83259 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV COMPOSITE SEALING SYSTEMS DIVISION (USA)
SPECIFICATIONS
Part Number800-530-1/4
NSN5330-00-585-8040
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 800-530-1/4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.049 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
RETAINER THICKNESS: 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
•
PACKING INSIDE DIAMETER: 0.236 INCHES MINIMUM AND 0.242 INCHES MAXIMUM IN
•
RETAINER INSIDE DIAMETER: 0.330 INCHES MINIMUM AND 0.336 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC PACKING
•
CONSTRUCTION: TWO-PIECE
TECHNICAL CHARACTERISTICS (FLIS)
PACKING RING CROSS-SECTIONAL DIAMETER0.049 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
RETAINER THICKNESS0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
PACKING INSIDE DIAMETER0.236 INCHES MINIMUM AND 0.242 INCHES MAXIMUM IN
RETAINER INSIDE DIAMETER0.330 INCHES MINIMUM AND 0.336 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC PACKING
MATERIALSTEEL CORROSION RESISTING RETAINER
CONSTRUCTIONTWO-PIECE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
230-207-028Interchangeable
interchangeable cross-reference
interchangeable
AN515C6-6Interchangeable
interchangeable cross-reference
interchangeable
5000 251904Interchangeable
interchangeable cross-reference
interchangeable
2304-4Interchangeable
interchangeable cross-reference
interchangeable
5389944Interchangeable
interchangeable cross-reference
interchangeable
5015Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 800-530-1/4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 800-530-1/4?
800-530-1/4 is a 800-530-1/4.
What parts can replace 800-530-1/4?
There are 15 known substitutes for 800-530-1/4: 230-207-028, AN515C6-6, 5000 251904 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 800-530-1/4?
800-530-1/4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-585-8040. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 800-530-1/4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026