PartsTable
Technical Data Sheet
Download PDF

800-3230-10 — PACKING WITH RETAINER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

800-3230-10: PACKING WITH RETAINER.

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING RETAINER, construction: ONE-PIECE, outside_diameter: 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN, retainer_thickness: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN, packing_inside_diameter: 0.173 INCHES MINIMUM AND 0.179 INCHES MAXIMUM IN, material_document_and_classification: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE RETAINER. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-146-2624, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
800-3230-10
NSN: 5330-00-146-2624
NIINs: 001462624, 010323569
FSC: 5330 — Packing and Gasket Materials
CAGE: 83259 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV COMPOSITE SEALING SYSTEMS DIVISION (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING RETAINER
constructionONE-PIECE
outside_diameter0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
retainer_thickness0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
packing_inside_diameter0.173 INCHES MINIMUM AND 0.179 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE RETAINER
packing_ring_cross-sectional_diameter0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
NSN5330-00-146-2624
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 800-3230-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER INSIDE DIAMETER: 0.274 INCHES NOMINAL IN
•
PACKING INSIDE DIAMETER: 0.176 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.438 INCHES NOMINAL IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.050 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248 TY 1,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE PACKING
•
RETAINER THICKNESS: 0.040 INCHES NOMINAL IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM PACKING
•
CONSTRUCTION: TWO-PIECE
TECHNICAL CHARACTERISTICS
RETAINER INSIDE DIAMETER0.274 INCHES NOMINAL IN
PACKING INSIDE DIAMETER0.176 INCHES NOMINAL IN
OUTSIDE DIAMETER0.438 INCHES NOMINAL IN
PACKING RING CROSS-SECTIONAL DIAMETER0.050 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248 TY 1,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE PACKING
RETAINER THICKNESS0.040 INCHES NOMINAL IN
MATERIALRUBBER FLUOROCARBON CLASS FPM PACKING
CONSTRUCTIONTWO-PIECE
SUBSTITUTES & CROSS-REFERENCES 3
1548803-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
800-3030-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
321-1588268-24Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 800-3230-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 800-3230-10?
800-3230-10 is a PACKING WITH RETAINER.
What parts can replace 800-3230-10?
There are 3 known substitutes for 800-3230-10: 1548803-10, 800-3030-10, 321-1588268-24. Substitute compatibility should be verified for your specific system.
What is the NSN for 800-3230-10?
800-3230-10 is cataloged in the U.S. Government catalog under NSN 5330-00-146-2624. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 800-3230-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.