PartsTable
Technical Data Sheet
Download PDF

800-00100 — CABLE ASSEMBLY,SPECIAL PURPOSE,E

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

800-00100: CABLE ASSEMBLY,SPECIAL PURPOSE,E.

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include hole_diameter: 0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM, outside_diameter: 0.325 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN, special_features: POWER CORD FOR THE ZOLL PROPAQ MD, style_designator: FLAT INTERNAL TEETH, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-559-0070, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
800-00100
NSN: 5310-00-559-0070
NIINs: 005590070, 016150623, 016668696
FSC: 5310 — Nuts and Washers
CAGE: 32345 — DEFENSE REDUCTION AGENCY (USA)
SPECIFICATIONS
materialSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
hole_diameter0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
outside_diameter0.325 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
special_featuresPOWER CORD FOR THE ZOLL PROPAQ MD
style_designatorFLAT INTERNAL TEETH
surface_treatmentCADMIUM OVERALL
material_thickness0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
end_item_identificationSUPPORT EQUIPMENT
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
part_name_assigned_by_controlling_agencySPECTROMETER,OIL,ANALYSIS
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-559-0070
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 800-00100 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 0.325 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORFLAT INTERNAL TEETH
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER0.325 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
MATERIAL THICKNESS0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE; LOGISTICS SUPPORT VESSEL; ARMORED MULTI-PURPOSE VEHICLE (AMPV)
MATERIALSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
HOLE DIAMETER0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 10
115544Reference document
Same NSN cross-reference
Reference document — Secondary reference
138530Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS35333-38Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10121184Reference document
Same NSN cross-reference
Reference document — Informative reference only
W22-4CAReference document
Same NSN cross-reference
Reference document — Secondary reference
4198000-12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 800-00100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 800-00100?
800-00100 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace 800-00100?
There are 10 known substitutes for 800-00100: 115544, 138530, MS35333-38 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 800-00100?
800-00100 is cataloged in the U.S. Government catalog under NSN 5310-00-559-0070. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 800-00100

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.