PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 800-001-1/40S
800-001-1/40S ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 800-001-1/40S is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-239-8733, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
800-001-1/40S
NSN: 5330-00-239-8733
FSC: 5330
CAGE: 83259 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV COMPOSITE SEALING SYSTEMS DIVISION (USA)
SPECIFICATIONS
Part Number800-001-1/40S
NSN5330-00-239-8733
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 800-001-1/40S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER INSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
RETAINER THICKNESS: 0.050 INCHES NOMINAL IN
•
CONSTRUCTION: TWO-PIECE
•
SURFACE TREATMENT: CADMIUM RETAINER
•
MATERIAL: STEEL RETAINER
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.070 INCHES NOMINAL IN
•
PACKING INSIDE DIAMETER: 0.239 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER INSIDE DIAMETER0.375 INCHES NOMINAL IN
RETAINER THICKNESS0.050 INCHES NOMINAL IN
CONSTRUCTIONTWO-PIECE
SURFACE TREATMENTCADMIUM RETAINER
MATERIALSTEEL RETAINER
MATERIALRUBBER SYNTHETIC PACKING
PACKING RING CROSS-SECTIONAL DIAMETER0.070 INCHES NOMINAL IN
PACKING INSIDE DIAMETER0.239 INCHES NOMINAL IN
OUTSIDE DIAMETER0.531 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
2018279Interchangeable
interchangeable cross-reference
interchangeable
AN4-15Interchangeable
interchangeable cross-reference
interchangeable
400 110Interchangeable
interchangeable cross-reference
interchangeable
6808Interchangeable
interchangeable cross-reference
interchangeable
35696Interchangeable
interchangeable cross-reference
interchangeable
90-2390Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 800-001-1/40S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 800-001-1/40S?
800-001-1/40S is a 800-001-1/40S.
What parts can replace 800-001-1/40S?
There are 12 known substitutes for 800-001-1/40S: 2018279, AN4-15, 400 110 and 9 more. Substitute compatibility should be verified for your specific system.
Is 800-001-1/40S still available?
800-001-1/40S is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 800-001-1/40S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026