PartsTable
Technical Data Sheet
Download PDF

80-XGX-1275 — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

80-XGX-1275: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 BALL, bore_diameter: 1.3777 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN, overall_width: 1.0824 INCHES MINIMUM AND 1.1024 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND, style_designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-144-8144, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
80-XGX-1275
NSN: 3110-01-144-8144
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 72328 — COTTA TRANSMISSION CO LLC (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 BALL
bore_diameter1.3777 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN
overall_width1.0824 INCHES MINIMUM AND 1.1024 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
features_providedALIGNING RING
end_item_identification4920-01-093-0521 TEST STAND,AIRCRAFT
overall_outside_diameter2.4407 INCHES MINIMUM AND 2.4409 INCHES MAXIMUM IN
standard_tolerance_designationABEC NO.7
NSN3110-01-144-8144
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 80-XGX-1275 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
•
OVERALL OUTSIDE DIAMETER: 2.4407 INCHES MINIMUM AND 2.4409 INCHES MAXIMUM IN
•
FEATURES PROVIDED: ALIGNING RING
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
OVERALL WIDTH1.0824 INCHES MINIMUM AND 1.1024 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER2.4407 INCHES MINIMUM AND 2.4409 INCHES MAXIMUM IN
FEATURES PROVIDEDALIGNING RING
LOAD DIRECTIONRADIAL
END ITEM IDENTIFICATION4920-01-093-0521 TEST STAND,AIRCRAFT
STANDARD TOLERANCE DESIGNATIONABEC NO.7
BORE DIAMETER1.3777 INCHES MINIMUM AND 1.3780 INCHES MAXIMUM IN
MATERIALSTEEL COMP E52100 BALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
2MM9107WIDULReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 80-XGX-1275?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 80-XGX-1275?
80-XGX-1275 is a BEARING,BALL,DUPLEX.
What parts can replace 80-XGX-1275?
There is 1 known substitute for 80-XGX-1275: 2MM9107WIDUL. Substitute compatibility should be verified for your specific system.
What is the NSN for 80-XGX-1275?
80-XGX-1275 is cataloged in the U.S. Government catalog under NSN 3110-01-144-8144. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 80-XGX-1275