PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 80-7350
80-7350 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.620 INCHES NOMINAL IN, length: 1.620 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.187 INCHES NOMINAL IN, overall_height: 1.310 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-203-6543, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
80-7350
NSN: 5340-01-203-6543
FSC: 5340
CAGE: 30554 — DEPARTMENT OF DEFENSE PROJECT MANAGER-MOBILE ELECTRIC POWER (USA)
SPECIFICATIONS
width0.620 INCHES NOMINAL IN
length1.620 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.187 INCHES NOMINAL IN
overall_height1.310 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
material_thickness0.0478 INCHES NOMINAL IN
loop/holding_dimension0.400 INCHES NOMINAL IN
NSN5340-01-203-6543
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 80-7350 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.620 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.400 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.187 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL THICKNESS: 0.0478 INCHES NOMINAL IN
•
WIDTH: 0.620 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH1.620 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.400 INCHES NOMINAL IN
HOLE DIAMETER0.187 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL THICKNESS0.0478 INCHES NOMINAL IN
OVERALL HEIGHT1.310 INCHES NOMINAL IN
WIDTH0.620 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
5154Interchangeable
interchangeable cross-reference
interchangeable
DS-934338Interchangeable
interchangeable cross-reference
interchangeable
10-292730Interchangeable
interchangeable cross-reference
interchangeable
127CInterchangeable
interchangeable cross-reference
interchangeable
012-500-0004Interchangeable
interchangeable cross-reference
interchangeable
TVR12-11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 80-7350?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 80-7350?
80-7350 is a CLIP,SPRING TENSION.
What parts can replace 80-7350?
There are 14 known substitutes for 80-7350: 5154, DS-934338, 10-292730 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 80-7350?
80-7350 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-203-6543. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 80-7350

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026