PartsTable
Technical Data Sheet
PartsTable / MRO / 80-458
80-458 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include guide: NOT INCLUDED, diameter: 0.3971 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, flute_type: INTEGRAL, shank_type: STRAIGHT, reamer_type: HELICAL TAPER PIN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3455-00-232-4101, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 80-458
NSN: 3455-00-232-4101
FSC: 3455
CAGE: 48521 — COLT INDUSTRIES OPERATING CORP PRATT AND WHITNEY MACHINE TOOL DIV
SPECIFICATIONS
guideNOT INCLUDED
diameter0.3971 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
flute_typeINTEGRAL
shank_typeSTRAIGHT
reamer_typeHELICAL TAPER PIN
flute_designHELICAL
flute_length5.188 INCHES NOMINAL IN
flute_quantity6
overall_length7.188 INCHES NOMINAL IN
shank_diameter0.438 INCHES NOMINAL IN
helix_directionLEFT-HAND
NSN3455-00-232-4101
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,FIXED,WIRE WOUND,INDUCT TITLE COMPONENT PN 80-458 MFR RESISTOR,FIXED,WIRE WO
KEY FEATURES
•
SHANK DIAMETER: 0.438 INCHES NOMINAL IN
•
MATERIAL: STEEL CUTTING EDGE TIP
•
SPECIFICATION/STANDARD DATA: 80204-B94.2 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
FLUTE QUANTITY: 6
•
FLUTE TYPE: INTEGRAL
•
DIAMETER: 0.3971 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
•
FLUTE CUT DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
SHANK DIAMETER0.438 INCHES NOMINAL IN
MATERIALSTEEL CUTTING EDGE TIP
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
SPECIFICATION/STANDARD DATA80204-B94.2 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
FLUTE QUANTITY6
FLUTE TYPEINTEGRAL
DIAMETER0.3971 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
FLUTE CUT DIRECTIONRIGHT-HAND
REAMER TYPEHELICAL TAPER PIN
FLUTE DESIGNHELICAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
M6SInterchangeable
interchangeable cross-reference
interchangeable
62606Interchangeable
interchangeable cross-reference
interchangeable
620-0016Interchangeable
interchangeable cross-reference
interchangeable
6508Interchangeable
interchangeable cross-reference
interchangeable
10531902Interchangeable
interchangeable cross-reference
interchangeable
187673PC306Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 80-458?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 80-458?
80-458 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 80-458?
There are 27 known substitutes for 80-458: M6S, 62606, 620-0016 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 80-458?
80-458 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3455-00-232-4101. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 80-458

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026