PartsTable
Technical Data Sheet
PartsTable / MRO / 80-031-1
80-031-1 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Stranded for flexible routing, solid for conduit THHN/THWN dual-rated — check both tables
Ampacity depends on installation method
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: CERAMIC CASE, body_style: W/O MTG FACILITIES, RADIAL TERMINALS, body_length: 0.156 INCHES MAXIMUM IN, body_diameter: 0.560 INCHES MAXIMUM IN, terminal_length: 1.250 INCHES MINIMUM IN, terminal_diameter: 0.025 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-552-9050, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 80-031-1
NSN: 6145-01-552-9050
FSC: 6145
CAGE: 00779 — TE CONNECTIVITY CORPORATION (USA)
SPECIFICATIONS
materialCERAMIC CASE
body_styleW/O MTG FACILITIES, RADIAL TERMINALS
body_length0.156 INCHES MAXIMUM IN
body_diameter0.560 INCHES MAXIMUM IN
terminal_length1.250 INCHES MINIMUM IN
terminal_diameter0.025 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
nonderated_operating_temp10.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data07148-SCD80031-1 MANUFACTURERS SOURCE CONTROL
tolerance_range_per_section-20.00 TO 80.00 PERCENT SINGLE SECTION
NSN6145-01-552-9050
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: 80-031-1 · OEM ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
SCD80031-1Interchangeable
interchangeable cross-reference
interchangeable
562R5HKS10Interchangeable
interchangeable cross-reference
interchangeable
5HKS10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 80-031-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 80-031-1?
80-031-1 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 80-031-1?
There are 3 known substitutes for 80-031-1: SCD80031-1, 562R5HKS10, 5HKS10. Substitute compatibility should be verified for your specific system.
What is the NSN for 80-031-1?
80-031-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-552-9050. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 80-031-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026