PartsTable
Technical Data Sheet
PartsTable / MRO / 80-0009
80-0009 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FILTERING DISK,FLUID is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 AND PLASTIC TETRAFLUOROETHYLENE FILTERING MEDIUM, design_type: REUSABLE, body_diameter: 5.438 INCHES NOMINAL IN, hole_diameter: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 9.000 INCHES NOMINAL IN, body_thickness: 0.028 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-096-8158, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 80-0009
NSN: 5330-00-096-8158
FSC: 5330
CAGE: 61465 — GARWOOD/FELLER INC GARWOOD WINCH DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 304 AND PLASTIC TETRAFLUOROETHYLENE FILTERING MEDIUM
design_typeREUSABLE
body_diameter5.438 INCHES NOMINAL IN
hole_diameter0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width9.000 INCHES NOMINAL IN
body_thickness0.028 INCHES NOMINAL IN
overall_height3.250 INCHES NOMINAL IN
overall_length6.250 INCHES NOMINAL IN
hardness_rating30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
special_featuresBLACK; EMERGENCY EQUIPMENT KT; HOLDS VITAL SUPPLIES AND EQUIPMENT; MOUNTED TO BELT AND LEGS; 2 LARGE POCKETS; PULL-OUT BAG; SEVERAL FLAT COMPARTMENTS FOR STORAGE SUPPLIES; ZIPPERED FRONT POCKET
style_designatorROUND (BASICALLY FLAT)
aperture_diameter2.875 INCHES NOMINAL IN
NSN5330-00-096-8158
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 80-0009 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE DIAMETER: 2.875 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 3.750 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.438 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 1.875 INCHES NOMINAL IN
•
MATERIAL: PAPER OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE DIAMETER2.875 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER3.750 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.438 INCHES NOMINAL IN
OVERALL WIDTH4.625 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER1.875 INCHES NOMINAL IN
MATERIALPAPER OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
80-0009Interchangeable
interchangeable cross-reference
interchangeable
S122Interchangeable
interchangeable cross-reference
interchangeable
J4242Interchangeable
interchangeable cross-reference
interchangeable
4400B1383-4Interchangeable
interchangeable cross-reference
interchangeable
147860Interchangeable
interchangeable cross-reference
interchangeable
ALS LEG BAG-BKInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 80-0009?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 80-0009?
80-0009 is a FILTERING DISK,FLUID. It is classified as a MRO (MRO_GENERAL).
What parts can replace 80-0009?
There are 7 known substitutes for 80-0009: 80-0009, S122, J4242 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 80-0009?
80-0009 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-096-8158. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 80-0009

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026