PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8-9803-8785-1
8-9803-8785-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 6.0 MILLIMETERS NOMINAL MM, overall_height: 33.0 MILLIMETERS NOMINAL MM, overall_length: 195.0 MILLIMETERS NOMINAL MM, mounting_hole_type: PLAIN, end_item_identification: GENERATOR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-649-4758, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8-9803-8785-1
NSN: 5340-01-649-4758
FSC: 5340
CAGE: 4N530 — ISUZU DIESEL OF NORTH AMERICA (USA)
SPECIFICATIONS
materialSTEEL
overall_width6.0 MILLIMETERS NOMINAL MM
overall_height33.0 MILLIMETERS NOMINAL MM
overall_length195.0 MILLIMETERS NOMINAL MM
mounting_hole_typePLAIN
end_item_identificationGENERATOR
part_name_assigned_by_controlling_agencyADJ PLATE ALTERNATOR
NSN5340-01-649-4758
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8-9803-8785-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE TYPE: PLAIN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS (FLIS)
PART NAME ASSIGNED BY CONTROLLING AGENCYADJ PLATE ALTERNATOR
END ITEM IDENTIFICATIONGENERATOR
MOUNTING HOLE TYPEPLAIN
MATERIALSTEEL
OVERALL LENGTH195.0 MILLIMETERS NOMINAL MM
OVERALL WIDTH6.0 MILLIMETERS NOMINAL MM
OVERALL HEIGHT33.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
27320Interchangeable
interchangeable cross-reference
interchangeable
404Interchangeable
interchangeable cross-reference
interchangeable
49770Interchangeable
interchangeable cross-reference
interchangeable
R51Interchangeable
interchangeable cross-reference
interchangeable
613332Interchangeable
interchangeable cross-reference
interchangeable
7064-15NInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8-9803-8785-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8-9803-8785-1?
8-9803-8785-1 is a BRACKET,MOUNTING.
What parts can replace 8-9803-8785-1?
There are 11 known substitutes for 8-9803-8785-1: 27320, 404, 49770 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8-9803-8785-1?
8-9803-8785-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-649-4758. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8-9803-8785-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026