PartsTable
Technical Data Sheet
Download PDF

8-8FE-SS — ELBOW,PIPE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

8-8FE-SS: ELBOW,PIPE.

The ELBOW,PIPE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, flow_angle: 90.0 DEGREES, leg_length: 1.406 INCHES NOMINAL ALL ENDS IN, connection_type: THREADED INTERNAL PIPE ALL ENDS, connection_style: PLAIN (PIPE) ALL ENDS, nominal_thread_size: 0.500 INCHES ALL ENDS IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-244-4666, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8-8FE-SS
NSN: 4730-01-244-4666
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 54938 — PARKER-HANNIFIN CORPORATION DIV INSTRUMENTATION PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
flow_angle90.0 DEGREES
leg_length1.406 INCHES NOMINAL ALL ENDS IN
connection_typeTHREADED INTERNAL PIPE ALL ENDS
connection_stylePLAIN (PIPE) ALL ENDS
nominal_thread_size0.500 INCHES ALL ENDS IN
thread_series_designatorNPT ALL ENDS
NSN4730-01-244-4666
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 8-8FE-SS · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW ANGLE: 90.0 DEGREES
•
CONNECTION STYLE: PLAIN (PIPE) ALL ENDS
•
CONNECTION TYPE: THREADED INTERNAL PIPE ALL ENDS
•
LEG LENGTH: 1.406 INCHES NOMINAL ALL ENDS IN
•
NOMINAL THREAD SIZE: 0.500 INCHES ALL ENDS IN
•
MATERIAL: STEEL COMP 316 OVERALL
•
THREAD SERIES DESIGNATOR: NPT ALL ENDS
TECHNICAL CHARACTERISTICS
FLOW ANGLE90.0 DEGREES
CONNECTION STYLEPLAIN (PIPE) ALL ENDS
CONNECTION TYPETHREADED INTERNAL PIPE ALL ENDS
LEG LENGTH1.406 INCHES NOMINAL ALL ENDS IN
NOMINAL THREAD SIZE0.500 INCHES ALL ENDS IN
MATERIALSTEEL COMP 316 OVERALL
THREAD SERIES DESIGNATORNPT ALL ENDS
SUBSTITUTES & CROSS-REFERENCES 3
8-E-316/90DEG,1/2INNPT/FEMSSTLReference document
Same NSN cross-reference
Reference document — Secondary reference
SS-8-2FF-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SS-8-EReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 8-8FE-SS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8-8FE-SS?
8-8FE-SS is a ELBOW,PIPE.
What parts can replace 8-8FE-SS?
There are 3 known substitutes for 8-8FE-SS: 8-E-316/90DEG,1/2INNPT/FEMSSTL, SS-8-2FF-8, SS-8-E. Substitute compatibility should be verified for your specific system.
What is the NSN for 8-8FE-SS?
8-8FE-SS is cataloged in the U.S. Government catalog under NSN 4730-01-244-4666. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8-8FE-SS