8-7-19 — CONNECTOR,PLUG,ELECTRICAL

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

8-7-19: CONNECTOR,PLUG,ELECTRICAL.

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, blade_width: 15.0 MILLIMETERS NOMINAL MM, design_designation: HOMAN, part_name_assigned_by_controlling_agency: RETRACTOR HOHMANN 15MM WIDE SS F/MINI FRAG SET MM. This part is cataloged in the U.S.

Government catalog under NSN 1620-00-741-9181, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 8-7-19

NSN: 1620-00-741-9181
NIINs: 007419181, 010362684, 010597622, 014432916, 014706341, 015666278
FSC: 1620 — Aircraft Landing Gear Components
CAGE: 6K4C8 — GOODRICH CORPORATION (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING OVERALL
blade_width	15.0 MILLIMETERS NOMINAL MM
special_features	HOHMANN; 15MM WIDE; HANDHELD SURG. INSTRUMENT DESIGNED FOR RETRACTING TISSUE TO EXPOSE BONES DURING SURGUREY; FOR USE W/THE MINI-FRAGMENT SURGERY SET, NSN: 6515-01-436-1020 MM
design_designation	HOMAN
part_name_assigned_by_controlling_agency	RETRACTOR HOHMANN 15MM WIDE SS F/MINI FRAG SET MM
NSN	1620-00-741-9181

COMPONENT DIAGRAM

KEY FEATURES

•

GENERAL CHARACTERISTICS ITEM DESCRIPTION: MIL-S-5626 STEEL CHROME PLATED;HEAT TREAT TO 180000 PSI MIN;1.060 IN. DIA BY 4.294 IN. LG SHAFT;0.4065 IN. DIA LEVER PIVOT HOLE OFFSET 0.950 IN. FROM CENTER LINE OF SHAFT;3/4-16NF3 THD 0.625 IN. DEEP IN END OF SHAFT IN

•

CRITICALITY CODE JUSTIFICATION: FEAT

•

REFERENCE DATA AND LITERATURE: T.O. 9H2-3-54-4

TECHNICAL CHARACTERISTICS

GENERAL CHARACTERISTICS ITEM DESCRIPTION	MIL-S-5626 STEEL CHROME PLATED;HEAT TREAT TO 180000 PSI MIN;1.060 IN. DIA BY 4.294 IN. LG SHAFT;0.4065 IN. DIA LEVER PIVOT HOLE OFFSET 0.950 IN. FROM CENTER LINE OF SHAFT;3/4-16NF3 THD 0.625 IN. DEEP IN END OF SHAFT IN
CRITICALITY CODE JUSTIFICATION	FEAT
REFERENCE DATA AND LITERATURE	T.O. 9H2-3-54-4
SPECIAL FEATURES	BASED ON HOW THE ITEM IS USED ON THE AIRCRAFT
END ITEM IDENTIFICATION	T-38 ACFT

SUBSTITUTES & CROSS-REFERENCES 1

08719Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)

Ready to buy 8-7-19?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 8-7-19?

8-7-19 is a CONNECTOR,PLUG,ELECTRICAL. It is classified as a MRO (MRO_GENERAL).

What parts can replace 8-7-19?

There is 1 known substitute for 8-7-19: 08719. Substitute compatibility should be verified for your specific system.

What is the NSN for 8-7-19?

8-7-19 is cataloged in the U.S. Government catalog under NSN 1620-00-741-9181. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

8-7-19 — CONNECTOR,PLUG,ELECTRICAL

Request a Quote — 8-7-19