PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8-65008
8-65008 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include width: 1.250 INCHES NOMINAL IN, material: STEEL, body_style: HOLE MOUNTEDHOLE MOUNTED, body_length: 0.875 INCHES NOMINAL IN, hole_diameter: 0.188 INCHES NOMINAL IN, rating_method: ELECTRICAL AND WINDING TURNS SINGLE COMPONENT SINGLE WINDING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-374-4445, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8-65008
NSN: 5340-00-374-4445
FSC: 5340
CAGE: 89749 — CLARK MATERIAL HANDLING COMPANY (USA)
SPECIFICATIONS
width1.250 INCHES NOMINAL IN
materialSTEEL
body_styleHOLE MOUNTEDHOLE MOUNTED
body_length0.875 INCHES NOMINAL IN
hole_diameter0.188 INCHES NOMINAL IN
rating_methodELECTRICAL AND WINDING TURNS SINGLE COMPONENT SINGLE WINDING
turn_quantity110 SINGLE COMPONENT SINGLE WINDING
coil_form_typeSOLID SINGLE COMPONENT
inclosure_typeOPEN
quality_factor25 MINIMUM SINGLE COMPONENT SINGLE WINDING
mounting_methodTERMINAL SINGLE GROUP
core_constructionPOWDERED SINGLE COMPONENT
NSN5340-00-374-4445
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8-65008 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: ELECTRICAL CONTACT BRUSH,ACCESS,STARTER,ENGINE ACCESSORY,NONAIRCRAFT
•
PERIPHERAL SHAPE STYLE: BAND TYPE
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
WIDTH: 1.250 INCHES NOMINAL IN
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
HOLE DIAMETER: 0.188 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS (FLIS)
FSC APPLICATION DATAELECTRICAL CONTACT BRUSH,ACCESS,STARTER,ENGINE ACCESSORY,NONAIRCRAFT
PERIPHERAL SHAPE STYLEBAND TYPE
CROSS-SECTIONAL SHAPE STYLEFLAT
WIDTH1.250 INCHES NOMINAL IN
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
HOLE DIAMETER0.188 INCHES NOMINAL IN
MATERIALSTEEL
SPECIAL FEATURESONE MTG HOLE IN EACH END,LOCATED IN FLANGE BENT 90.0 DEG TO SURFACE OF COVER; W/GASKET LINING STAPLED ON INSIDE SURFACE OF COVER; ALONG LG DIM. COVER IS PREFORM TO A CIRCLE W/4.375 IN. ID TO GASKET SURFACE; MOISTURE AND FUNGUS-RESISTANT IN ACCORDANCE WITH MIL-T-152 IN
SECURING DEVICE TYPETHREADED FASTENER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
568Interchangeable
interchangeable cross-reference
interchangeable
8-65008Interchangeable
interchangeable cross-reference
interchangeable
MS3102A-20-27PInterchangeable
interchangeable cross-reference
interchangeable
856008Interchangeable
interchangeable cross-reference
interchangeable
1913933Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8-65008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8-65008?
8-65008 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 8-65008?
There are 5 known substitutes for 8-65008: 568, 8-65008, MS3102A-20-27P and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8-65008?
8-65008 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-374-4445. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8-65008

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026