PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8-0209-01
8-0209-01 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The IMPELLER,PUMP,CENTRIFUGAL is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400 OVERALL, overall_length: 4.8750 INCHES NOMINAL IN, special_features: USED ON BUFFALO PUMP MODEL 16 VHSM CENTRIFUGAL PUMPS, body_inside_diameter: 3.6250 INCHES NOMINAL IN, body_outside_diameter: 4.0000 INCHES NOMINAL IN, end_item_identification: STRATEGIC SEALIFT CONVERSION SHIPS CLASS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-913-0963, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8-0209-01
NSN: 5315-00-913-0963
FSC: 5315
CAGE: 64547 — HONEYWELL INTERNATIONAL, INC DIV AEROSPACE-TUCSON (USA)
SPECIFICATIONS
materialNICKEL ALLOY 400 OVERALL
overall_length4.8750 INCHES NOMINAL IN
special_featuresUSED ON BUFFALO PUMP MODEL 16 VHSM CENTRIFUGAL PUMPS
body_inside_diameter3.6250 INCHES NOMINAL IN
body_outside_diameter4.0000 INCHES NOMINAL IN
end_item_identificationSTRATEGIC SEALIFT CONVERSION SHIPS CLASS
material_document_and_classificationASTM B164,ALLOY 400 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-913-0963
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8-0209-01 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.005 INCHES MINIMUM AND 0.010 INCHES MAXIMUM IN
•
FIRST END TAPER ANGLE: 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL COMP 302 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL DIAMETER: 0.0387 INCHES MINIMUM AND 0.0390 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER LENGTH0.005 INCHES MINIMUM AND 0.010 INCHES MAXIMUM IN
FIRST END TAPER ANGLE43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL COMP 302 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL DIAMETER0.0387 INCHES MINIMUM AND 0.0390 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
NA1781Interchangeable
interchangeable cross-reference
interchangeable
8-0209-01Interchangeable
interchangeable cross-reference
interchangeable
PL.16VHSM-1 ITEM 8BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8-0209-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8-0209-01?
8-0209-01 is a IMPELLER,PUMP,CENTRIFUGAL.
What parts can replace 8-0209-01?
There are 3 known substitutes for 8-0209-01: NA1781, 8-0209-01, PL.16VHSM-1 ITEM 8B. Substitute compatibility should be verified for your specific system.
What is the NSN for 8-0209-01?
8-0209-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-913-0963. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8-0209-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026