PartsTable
Technical Data Sheet
Download PDF

8 1-2IND — RESISTOR,FIXED,WIRE WOUND

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

8 1-2IND: RESISTOR,FIXED,WIRE WOUND.

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include body_length: 8.500 INCHES NOMINAL IN, body_diameter: 1.375 INCHES NOMINAL IN, cubic_measure: 12.622 CUBIC INCHES, terminal_type: TAB W/SCREW, inclosure_type: UNINCLOSED, terminal_width: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-101-4344, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 8 1-2IND
NSN: 5905-00-101-4344
NIINs: 001014344, 002699184, 002954623, 006439474
FSC: 5905 — Resistor
CAGE: 63743 — WARD LEONARD CT LLC (USA)
SPECIFICATIONS
body_length8.500 INCHES NOMINAL IN
body_diameter1.375 INCHES NOMINAL IN
cubic_measure12.622 CUBIC INCHES
terminal_typeTAB W/SCREW
inclosure_typeUNINCLOSED
terminal_width0.312 INCHES NOMINAL IN
terminal_length0.812 INCHES NOMINAL IN
style_designatorRADIAL TERMINAL EACH END
fixed_tap_quantity11
electrical_resistance12.000 OHMS
reliability_indicatorNOT ESTABLISHED
fixed_tap_terminal_typeTAB W/SCREW
NSN5905-00-101-4344
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,FIXED,WIRE WOUND TITLE COMPONENT PN 8 1-2IND MFR RESISTOR,FIXED,WIRE WO
KEY FEATURES
•
RESISTANCE TOLERANCE IN PERCENT: -10.000 TO 10.000
•
BODY DIAMETER: 1.375 INCHES NOMINAL IN
•
ELECTRICAL RESISTANCE: 1.500 OHMS
•
INCLOSURE TYPE: UNINCLOSED
•
TERMINAL TYPE: TAB, SOLDER LUG
•
TERMINAL LENGTH: 0.562 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RADIAL TERMINAL EACH END
•
POWER DISSIPATION RATING IN WATTS: 300.000 FREE AIR
TECHNICAL CHARACTERISTICS
RESISTANCE TOLERANCE IN PERCENT-10.000 TO 10.000
BODY DIAMETER1.375 INCHES NOMINAL IN
ELECTRICAL RESISTANCE1.500 OHMS
INCLOSURE TYPEUNINCLOSED
TERMINAL TYPETAB, SOLDER LUG
TERMINAL LENGTH0.562 INCHES NOMINAL IN
STYLE DESIGNATORRADIAL TERMINAL EACH END
POWER DISSIPATION RATING IN WATTS300.000 FREE AIR
AMBIENT TEMP AT FULL RATED POWER40.0 CELSIUS DEGC
BODY LENGTH8.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
8 1-2IND1-5Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 8 1-2IND?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8 1-2IND?
8 1-2IND is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 8 1-2IND?
There is 1 known substitute for 8 1-2IND: 8 1-2IND1-5. Substitute compatibility should be verified for your specific system.
What is the NSN for 8 1-2IND?
8 1-2IND is cataloged in the U.S. Government catalog under NSN 5905-00-101-4344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8 1-2IND