PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7Z7-062
7Z7-062 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include phase: TWO INPUT, material: FIBER AND RUBBER BODY, duty_cycle: CONTINUOUS, temp_rating: -28.0 OPERATING CELSIUS AND 60.0 OPERATING CELSIUS AND 52.0 AMBIENT CELSIUS, current_type: AC INPUT, winding_type: INDUCTION-SQUIRREL CAGE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-288-2136, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7Z7-062
NSN: 3110-01-288-2136
FSC: 3110
CAGE: 59076 — DESIGNATRONICS INC STOCK DRIVE PRODUCTS DIV (USA)
SPECIFICATIONS
phaseTWO INPUT
materialFIBER AND RUBBER BODY
duty_cycleCONTINUOUS
temp_rating-28.0 OPERATING CELSIUS AND 60.0 OPERATING CELSIUS AND 52.0 AMBIENT CELSIUS
current_typeAC INPUT
winding_typeINDUCTION-SQUIRREL CAGE
bore_diameter0.3130 INCHES MINIMUM AND 0.3140 INCHES MAXIMUM IN
overall_width0.4280 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
alignment_typeRIGID
overall_height1.719 INCHES IN
overall_length2.188 INCHES IN
shaft_diameter0.1245 INCHES NOMINAL SINGLE END IN
NSN3110-01-288-2136
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7Z7-062 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
108479-02Interchangeable
interchangeable cross-reference
interchangeable
B57Interchangeable
interchangeable cross-reference
interchangeable
01-49018-65Interchangeable
interchangeable cross-reference
interchangeable
M38510/00202BCXInterchangeable
interchangeable cross-reference
interchangeable
431-016-9313Interchangeable
interchangeable cross-reference
interchangeable
3080072Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7Z7-062?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7Z7-062?
7Z7-062 is a BEARING,BALL,THRUST.
What parts can replace 7Z7-062?
There are 16 known substitutes for 7Z7-062: 108479-02, B57, 01-49018-65 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7Z7-062?
7Z7-062 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-288-2136. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7Z7-062

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026