PartsTable
Technical Data Sheet
Download PDF

7TF — STAND,VEHICLE SUPPORT

✓ Government record, cited
— · GATE VALVE
PRODUCT OVERVIEW

7TF: STAND,VEHICLE SUPPORT.

The STAND,VEHICLE SUPPORT is a the manufacturer industrial component. Key specifications include design_type: STAND, overall_width: 9.000 INCHES NOMINAL IN, overall_height: 16.000 INCHES MAXIMUM IN, overall_length: 9.000 INCHES NOMINAL IN, special_features: SHIPPING WEIGHT: 32 LBS. LBS, end_item_identification: 4910-00-754-0654.

This part is cataloged in the U.S. Government catalog under NSN 4820-01-115-3786, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7TF
NSN: 4820-01-115-3786
NIINs: 011153786, 014981590
FSC: 4820 — Valves, Nonpowered
CAGE: 14959 — CRANE CO DIV VALVE DIV (USA)
SPECIFICATIONS
design_typeSTAND
overall_width9.000 INCHES NOMINAL IN
overall_height16.000 INCHES MAXIMUM IN
overall_length9.000 INCHES NOMINAL IN
special_featuresSHIPPING WEIGHT: 32 LBS. LBS
end_item_identification4910-00-754-0654
NSN4820-01-115-3786
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 7TF · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW CONTROL DEVICE: DISK
•
CONNECTION STYLE: PLAIN,OPTIONAL END(PIPE) ALL ENDS
•
CONNECTION TYPE: THREADED INTERNAL PIPE ALL ENDS
•
STYLE DESIGNATOR: STRAIGHT THRU
•
OPERATING PRESSURE: 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
BONNET TYPE: OUTSIDE SCREW-YOKE
•
THREAD DIRECTION: RIGHT-HAND ALL ENDS
•
NOMINAL THREAD SIZE: 1.000 INCHES ALL ENDS IN
TECHNICAL CHARACTERISTICS
FLOW CONTROL DEVICEDISK
CONNECTION STYLEPLAIN,OPTIONAL END(PIPE) ALL ENDS
CONNECTION TYPETHREADED INTERNAL PIPE ALL ENDS
STYLE DESIGNATORSTRAIGHT THRU
OPERATING PRESSURE150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
BONNET TYPEOUTSIDE SCREW-YOKE
THREAD DIRECTIONRIGHT-HAND ALL ENDS
NOMINAL THREAD SIZE1.000 INCHES ALL ENDS IN
MAXIMUM OPERATING TEMP418.0 FAHRENHEIT SINGLE RESPONSE DEGF
BONNET ATTACHMENT METHODBOLTED
SUBSTITUTES & CROSS-REFERENCES 3
FIG 106BJ-1 INCHSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
CAT-FIG 106-A-1INReference document
Same NSN cross-reference
Reference document — Design control — primary reference
B22TSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7TF?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7TF?
7TF is a STAND,VEHICLE SUPPORT.
What parts can replace 7TF?
There are 3 known substitutes for 7TF: FIG 106BJ-1 INCH, CAT-FIG 106-A-1IN, B22T. Substitute compatibility should be verified for your specific system.
What is the NSN for 7TF?
7TF is cataloged in the U.S. Government catalog under NSN 4820-01-115-3786. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7TF

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.