PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7TAD012070R0005
7TAD012070R0005 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING, construction: ONE-PIECE, outside_diameter: 2.920 INCHES NOMINAL IN, surface_treatment: ANODIZE RETAINER, retainer_thickness: 0.210 INCHES NOMINAL IN, packing_inside_diameter: 2.438 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-066-9423, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7TAD012070R0005
NSN: 5330-01-066-9423
FSC: 5330
CAGE: 56501 — ABB INSTALLATION PRODUCTS INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING
constructionONE-PIECE
outside_diameter2.920 INCHES NOMINAL IN
surface_treatmentANODIZE RETAINER
retainer_thickness0.210 INCHES NOMINAL IN
packing_inside_diameter2.438 INCHES NOMINAL IN
retainer_inside_diameter2.750 INCHES NOMINAL IN
packing_ring_cross-sectional_diameter0.250 INCHES NOMINAL IN
NSN5330-01-066-9423
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7TAD012070R0005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.250 INCHES NOMINAL IN
•
RETAINER INSIDE DIAMETER: 2.750 INCHES NOMINAL IN
•
PACKING INSIDE DIAMETER: 2.438 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING
•
OUTSIDE DIAMETER: 2.920 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE RETAINER
•
CONSTRUCTION: ONE-PIECE
•
RETAINER THICKNESS: 0.210 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PACKING RING CROSS-SECTIONAL DIAMETER0.250 INCHES NOMINAL IN
RETAINER INSIDE DIAMETER2.750 INCHES NOMINAL IN
PACKING INSIDE DIAMETER2.438 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR PACKING
OUTSIDE DIAMETER2.920 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE RETAINER
CONSTRUCTIONONE-PIECE
RETAINER THICKNESS0.210 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
5267Interchangeable
interchangeable cross-reference
interchangeable
1228E83Interchangeable
interchangeable cross-reference
interchangeable
177992Interchangeable
interchangeable cross-reference
interchangeable
5798FInterchangeable
interchangeable cross-reference
interchangeable
BB3404Interchangeable
interchangeable cross-reference
interchangeable
7412394Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7TAD012070R0005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7TAD012070R0005?
7TAD012070R0005 is a PACKING WITH RETAINER.
What parts can replace 7TAD012070R0005?
There are 18 known substitutes for 7TAD012070R0005: 5267, 1228E83, 177992 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7TAD012070R0005?
7TAD012070R0005 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-066-9423. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7TAD012070R0005

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026