PartsTable
Technical Data Sheet
Download PDF

7S4534 — RETAINER AND ROLLERS,BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

7S4534: RETAINER AND ROLLERS,BEARING.

The RETAINER AND ROLLERS,BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.0407 INCHES MINIMUM AND 1.0411 INCHES MAXIMUM IN, overall_width: 1.2370 INCHES MINIMUM AND 1.2470 INCHES MAXIMUM IN, outside_diameter: 1.3539 INCHES MINIMUM AND 1.3545 INCHES MAXIMUM IN, special_features: 16CONTROLLED CONTOUR FLAT END ROLLERS,0.1561 IN. MIN 0.1562 IN.

MAX DIA BY 1.1230 IN. MIN 1.1330 IN. MAX LENGTH IN, style_designator: RETAINER AND NEEDLE ROLLERS.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-038-9247, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7S4534
NSN: 3110-00-038-9247
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.0407 INCHES MINIMUM AND 1.0411 INCHES MAXIMUM IN
overall_width1.2370 INCHES MINIMUM AND 1.2470 INCHES MAXIMUM IN
outside_diameter1.3539 INCHES MINIMUM AND 1.3545 INCHES MAXIMUM IN
special_features16CONTROLLED CONTOUR FLAT END ROLLERS,0.1561 IN. MIN 0.1562 IN. MAX DIA BY 1.1230 IN. MIN 1.1330 IN. MAX LENGTH IN
style_designatorRETAINER AND NEEDLE ROLLERS
retainer_piece_quantity1
NSN3110-00-038-9247
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7S4534 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RETAINER AND NEEDLE ROLLERS
•
OUTSIDE DIAMETER: 1.3539 INCHES MINIMUM AND 1.3545 INCHES MAXIMUM IN
•
BORE DIAMETER: 1.0407 INCHES MINIMUM AND 1.0411 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
RETAINER PIECE QUANTITY: 1
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORRETAINER AND NEEDLE ROLLERS
OVERALL WIDTH1.2370 INCHES MINIMUM AND 1.2470 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.3539 INCHES MINIMUM AND 1.3545 INCHES MAXIMUM IN
SPECIAL FEATURES16CONTROLLED CONTOUR FLAT END ROLLERS,0.1561 IN. MIN 0.1562 IN. MAX DIA BY 1.1230 IN. MIN 1.1330 IN. MAX LENGTH IN
BORE DIAMETER1.0407 INCHES MINIMUM AND 1.0411 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
RETAINER PIECE QUANTITY1
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7S4534?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7S4534?
7S4534 is a RETAINER AND ROLLERS,BEARING.
What is the NSN for 7S4534?
7S4534 is cataloged in the U.S. Government catalog under NSN 3110-00-038-9247. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7S4534