PartsTable
Technical Data Sheet
Download PDF

7S3913 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7S3913: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, length: 2.350 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.562 INCHES NOMINAL IN, overall_height: 0.885 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-00-402-9175, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7S3913
NSN: 5340-00-402-9175
FSC: 5340 — Hardware, Commercial
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
length2.350 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.562 INCHES NOMINAL IN
overall_height0.885 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
material_thickness0.097 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
loop/holding_dimension0.880 INCHES NOMINAL IN
material_document_and_classification1E166,CAGE11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-402-9175
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7S3913 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.350 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: 1E166,CAGE11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.880 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.097 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
•
WIDTH: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.885 INCHES NOMINAL IN
LENGTH2.350 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATION1E166,CAGE11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.880 INCHES NOMINAL IN
MATERIAL THICKNESS0.097 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
WIDTH1.000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.562 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
31-7S3913Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7S3913?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7S3913?
7S3913 is a CLIP,SPRING TENSION.
What parts can replace 7S3913?
There is 1 known substitute for 7S3913: 31-7S3913. Substitute compatibility should be verified for your specific system.
What is the NSN for 7S3913?
7S3913 is cataloged in the U.S. Government catalog under NSN 5340-00-402-9175. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7S3913

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.