PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7S236559
7S236559 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

STUD ASSEMBLY,TURNLOCK FASTENER. Key specifications include diameter: 0.298 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN, material: STEEL COMP 302 OR STEEL CORROSION RESISTING EJECTOR SPRING, drive_type: SLOTTED, eyelet_length: 0.322 INCHES NOMINAL IN, stud_head_height: 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-584-0024, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7S236559
NSN: 5325-00-584-0024
FSC: 5325
CAGE: H0212 — KONINKLIJKE FABRIEK INVENTUM B.V. (NLD)
SPECIFICATIONS
diameter0.298 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
materialSTEEL COMP 302 OR STEEL CORROSION RESISTING EJECTOR SPRING
drive_typeSLOTTED
eyelet_length0.322 INCHES NOMINAL IN
stud_head_height0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
stud_assembly_styleSTUD ASSEMBLY
securing_device_typeSPRING
eyelet_outside_diameter0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
turnlock_stud_head_styleFLAT FILLISTER
material_accommodated_thickness0.060 INCHES MINIMUM AND 0.089 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR 71321 CAGEC,TYPE 384 MFR REF 2ND MATERIAL RESPONSE EJECTOR SPRING
NSN5325-00-584-0024
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 7S236559 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STUD ASSEMBLY STYLE: STUD ASSEMBLY
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR 71321 CAGEC,TYPE 384 MFR REF 2ND MATERIAL RESPONSE STUD
•
DRIVE TYPE: SLOTTED
•
EYELET OUTSIDE DIAMETER: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 302 OR STEEL CORROSION RESISTING STUD
TECHNICAL CHARACTERISTICS (FLIS)
STUD ASSEMBLY STYLESTUD ASSEMBLY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR 71321 CAGEC,TYPE 384 MFR REF 2ND MATERIAL RESPONSE STUD
DRIVE TYPESLOTTED
EYELET OUTSIDE DIAMETER0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR 71321 CAGEC,TYPE 384 MFR REF 2ND MATERIAL RESPONSE EJECTOR SPRING
MATERIALSTEEL COMP 302 OR STEEL CORROSION RESISTING STUD
MATERIALSTEEL COMP 305 EYELET
MATERIALSTEEL COMP 302 OR STEEL CORROSION RESISTING PIN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
670X42Interchangeable
interchangeable cross-reference
interchangeable
2021-2-4CInterchangeable
interchangeable cross-reference
interchangeable
236559Interchangeable
interchangeable cross-reference
interchangeable
1126007-2Interchangeable
Same NIIN cross-reference
interchangeable
GS521A2SInterchangeable
Same NIIN cross-reference
interchangeable
65C9942-2Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7S236559?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7S236559?
7S236559 is a STUD ASSEMBLY,TURNLOCK FASTENER.
What parts can replace 7S236559?
There are 10 known substitutes for 7S236559: 670X42, 2021-2-4C, 236559 and 7 more. Substitute compatibility should be verified for your specific system.
Is 7S236559 still available?
7S236559 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7S236559

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026