PartsTable
Technical Data Sheet
Download PDF

7S235985 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

7S235985: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, thread_length: 0.500 INCHES NOMINAL IN, screw_material: STEEL COMP 316, fastener_length: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-407-5431, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7S235985
NSN: 5305-01-407-5431
FSC: 5305 — Screws
CAGE: H0212 — KONINKLIJKE FABRIEK INVENTUM B.V. (NLD)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
thread_length0.500 INCHES NOMINAL IN
screw_materialSTEEL COMP 316
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch32
NSN5305-01-407-5431
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 7S235985 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.500 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 316
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.500 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.500 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 316
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
SUBSTITUTES & CROSS-REFERENCES 5
593-6961253PC8Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5305PL0885560Reference document
Same NSN cross-reference
Reference document — Informative reference only
NO.6-32UNC-2A,1/2"LG CRES 316Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS24693-C28Reference document
Same NSN cross-reference
Reference document — Identification reference
593-6961253 PCReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7S235985?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7S235985?
7S235985 is a SCREW,MACHINE.
What parts can replace 7S235985?
There are 5 known substitutes for 7S235985: 593-6961253PC8, 5305PL0885560, NO.6-32UNC-2A,1/2"LG CRES 316 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7S235985?
7S235985 is cataloged in the U.S. Government catalog under NSN 5305-01-407-5431. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7S235985