PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7NBC1015
7NBC1015 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 0.4380 INCHES NOMINAL IN, alignment_type: RIGID, surface_treatment: CADMIUM OVERALL, lubrication_material: GREASE, overall_outside_diameter: 0.9380 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-7468, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7NBC1015
NSN: 3110-00-108-7468
FSC: 3110
CAGE: 51588 — RBC BEARINGS INCORPORATED DIV WEST TRENTON DIVISION (USA)
SPECIFICATIONS
bore_diameter0.4380 INCHES NOMINAL IN
alignment_typeRIGID
surface_treatmentCADMIUM OVERALL
lubrication_materialGREASE
overall_outside_diameter0.9380 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
NSN3110-00-108-7468
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7NBC1015 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 0.9380 INCHES NOMINAL IN
•
BORE DIAMETER: 0.4380 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIALGREASE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR AIRFRAME NEEDLE BEARINGS
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER0.9380 INCHES NOMINAL IN
BORE DIAMETER0.4380 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
2-907Interchangeable
interchangeable cross-reference
interchangeable
5453Interchangeable
interchangeable cross-reference
interchangeable
V190Interchangeable
interchangeable cross-reference
interchangeable
MS17161-39Interchangeable
interchangeable cross-reference
interchangeable
AN335-6Interchangeable
interchangeable cross-reference
interchangeable
FF-B-571Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7NBC1015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7NBC1015?
7NBC1015 is a BEARING,ROLLER,NEEDLE.
What parts can replace 7NBC1015?
There are 8 known substitutes for 7NBC1015: 2-907, 5453, V190 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7NBC1015?
7NBC1015 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-7468. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7NBC1015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026