7N667 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

7N667: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.406 INCHES NOMINAL IN, material: STEEL OVERALL, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 4.120 INCHES NOMINAL IN, special_features: FIRST HOLE 0.380 IN. FROM END IN, style_designator: SINGLE LOOP.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-121-0525, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

7N667

NSN: 5340-01-121-0525
FSC: 5340 — Hardware, Commercial
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)

SPECIFICATIONS

diameter	0.406 INCHES NOMINAL IN
material	STEEL OVERALL
overall_width	0.750 INCHES NOMINAL IN
overall_length	4.120 INCHES NOMINAL IN
special_features	FIRST HOLE 0.380 IN. FROM END IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
material_document_and_classification	1E357 FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL
center_to_center_distance_between_first_and_second_holes	3.000 INCHES NOMINAL IN
NSN	5340-01-121-0525

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: 1E357 FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL

•

DIAMETER: 0.406 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN

•

CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 3.000 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	1E357 FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL
DIAMETER	0.406 INCHES NOMINAL IN
OVERALL LENGTH	4.120 INCHES NOMINAL IN
OVERALL WIDTH	0.750 INCHES NOMINAL IN
MATERIAL THICKNESS	0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES	3.000 INCHES NOMINAL IN
SPECIAL FEATURES	FIRST HOLE 0.380 IN. FROM END IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
MATERIAL	STEEL OVERALL

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 1

7N0667Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 7N667?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 7N667?

7N667 is a CLAMP,LOOP.

What parts can replace 7N667?

There is 1 known substitute for 7N667: 7N0667. Substitute compatibility should be verified for your specific system.

What is the NSN for 7N667?

7N667 is cataloged in the U.S. Government catalog under NSN 5340-01-121-0525. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

7N667 — CLAMP,LOOP

Request a Quote — 7N667