Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.174 INCHES MINIMUM AND 0.184 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN, material_document_and_classification: MIL-R-25988 TYPE 1, CLASS 1, GRADE 70 MIL SPEC SINGLE MATERIAL RESPONSE. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-322-0137, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
7M80-6
NSN:5331-00-322-0137 FSC:5331 — O-RING CAGE:76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
material
RUBBER FLUOROSILICONE CLASS FQ
hardness_rating
70.0 SHORE DUROMETER A NOMINAL
center_hole_diameter
0.174 INCHES MINIMUM AND 0.184 INCHES MAXIMUM IN
elongation_percentage
125 MAXIMUM
cross-sectional_height
0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
material_document_and_classification
MIL-R-25988 TYPE 1, CLASS 1, GRADE 70 MIL SPEC SINGLE MATERIAL RESPONSE
NSN
5331-00-322-0137
COMPONENT DIAGRAM
KEY FEATURES
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.174 INCHES MINIMUM AND 0.184 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-25988 TYPE 1, CLASS 1, GRADE 70 MIL SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: RUBBER FLUOROSILICONE CLASS FQ
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING
70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE
125 MAXIMUM
CROSS-SECTIONAL HEIGHT
0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
CENTER HOLE DIAMETER
0.174 INCHES MINIMUM AND 0.184 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-R-25988 TYPE 1, CLASS 1, GRADE 70 MIL SPEC SINGLE MATERIAL RESPONSE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7M80-6?
7M80-6 is a O-RING.
What parts can replace 7M80-6?
There are 20 known substitutes for 7M80-6: 1002199-P3, K-24780, 912160 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7M80-6?
7M80-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-322-0137. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.