PartsTable
Technical Data Sheet
Download PDF

7M754-133-1 — PACKING WITH RETAINER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7M754-133-1: PACKING WITH RETAINER.

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include outside_diameter: 1.992 INCHES NOMINAL IN, packing_inside_diameter: 1.801 INCHES NOMINAL IN, packing_ring_cross-sectional_diameter: 0.027 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-157-3824, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7M754-133-1
NSN: 5330-01-157-3824
FSC: 5330 — Packing and Gasket Materials
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
outside_diameter1.992 INCHES NOMINAL IN
packing_inside_diameter1.801 INCHES NOMINAL IN
packing_ring_cross-sectional_diameter0.027 INCHES NOMINAL IN
NSN5330-01-157-3824
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7M754-133-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING INSIDE DIAMETER: 1.801 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.992 INCHES NOMINAL IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.027 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
PACKING INSIDE DIAMETER1.801 INCHES NOMINAL IN
OUTSIDE DIAMETER1.992 INCHES NOMINAL IN
PACKING RING CROSS-SECTIONAL DIAMETER0.027 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
7133MR733-TReference document
Same NSN cross-reference
Reference document — Secondary reference
S34700-133R1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7M754-133-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7M754-133-1?
7M754-133-1 is a PACKING WITH RETAINER.
What parts can replace 7M754-133-1?
There are 2 known substitutes for 7M754-133-1: 7133MR733-T, S34700-133R1. Substitute compatibility should be verified for your specific system.
What is the NSN for 7M754-133-1?
7M754-133-1 is cataloged in the U.S. Government catalog under NSN 5330-01-157-3824. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7M754-133-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.