PartsTable
Technical Data Sheet
Download PDF

7M133D80-04 — REDUCER,TUBE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

7M133D80-04: REDUCER,TUBE.

The REDUCER,TUBE is a the manufacturer industrial component. Key specifications include reducer_type: CONCENTRIC, surface_treatment: ANODIZE OVERALL, operating_pressure: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, nominal_overall_length: 2.159 INCHES IN, thread_series_designator: UNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS, surface_treatment_document_and_classification: MIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-075-1050, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7M133D80-04
NSN: 4730-01-075-1050
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 14397 — FABER ENTERPRISES, INC. DIV FABER ENTERPRISE INC (USA)
SPECIFICATIONS
reducer_typeCONCENTRIC
surface_treatmentANODIZE OVERALL
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_overall_length2.159 INCHES IN
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN4730-01-075-1050
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 7M133D80-04 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
NOMINAL OVERALL LENGTH: 2.159 INCHES IN
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
SURFACE TREATMENT: ANODIZE OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS
•
REDUCER TYPE: CONCENTRIC
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NOMINAL OVERALL LENGTH2.159 INCHES IN
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SURFACE TREATMENTANODIZE OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) ALL ENDS
REDUCER TYPECONCENTRIC
SUBSTITUTES & CROSS-REFERENCES 2
7M133D08-04Reference document
Same NSN cross-reference
Reference document — Secondary reference
7M133Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7M133D80-04?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7M133D80-04?
7M133D80-04 is a REDUCER,TUBE.
What parts can replace 7M133D80-04?
There are 2 known substitutes for 7M133D80-04: 7M133D08-04, 7M133. Substitute compatibility should be verified for your specific system.
What is the NSN for 7M133D80-04?
7M133D80-04 is cataloged in the U.S. Government catalog under NSN 4730-01-075-1050. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7M133D80-04

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.