7M1165-16-0125B: HOSE ASSEMBLY,NONMETALLIC.
The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 45.0 DEGREES SECOND END, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF, operating_pressure: 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS, thread_quantity_per_inch: 12 ALL ENDS, thread_series_designator: UNIFIED NATIONAL JOINT (UNJ) ALL ENDS, measuring_method_and_length: 12.625 INCHES NOMINAL OVERALL IN. This part is cataloged in the U.S.
Government catalog under NSN 4720-01-605-7173, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| flow_angle | 45.0 DEGREES SECOND END |
| temp_rating | -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| operating_pressure | 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| thread_quantity_per_inch | 12 ALL ENDS |
| thread_series_designator | UNIFIED NATIONAL JOINT (UNJ) ALL ENDS |
| measuring_method_and_length | 12.625 INCHES NOMINAL OVERALL IN |
| minimum_inside_bending_radius | 3.0 INCHES IN |
| layer_composition_and_location | 1ST LAYER PLASTIC, TETRAFLUOROETHYLENE |
| end_fitting_component_and_material | SOCKET STEEL CORROSION RESISTING ALL ENDS |
| part_name_assigned_by_controlling_agency | HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, LOW PRESSURE |
| NSN | 4720-01-605-7173 |
| FLOW ANGLE | 45.0 DEGREES SECOND END |
| MEASURING METHOD AND LENGTH | 12.625 INCHES NOMINAL OVERALL IN |
| TEMP RATING | -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| MINIMUM INSIDE BENDING RADIUS | 3.0 INCHES IN |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER PLASTIC, TETRAFLUOROETHYLENE |
| OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| END FITTING COMPONENT AND MATERIAL | SOCKET STEEL CORROSION RESISTING ALL ENDS |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, LOW PRESSURE |
| THREAD QUANTITY PER INCH | 12 ALL ENDS |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT (UNJ) ALL ENDS |
No substitute or cross-reference records for this part.