7M1113-1: 7M1113-1.
The 7M1113-1 is a the manufacturer industrial component. This part is cataloged in the U.S. Government catalog under NSN 2945-01-454-5720, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| Part Number | 7M1113-1 |
| NSN | 2945-01-454-5720 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-PRF-85285 MIL STD SINGLE TREATMENT RESPONSE AND MIL-P-53022 MIL STD SINGLE TREATMENT RESPONSE BODY |
| SPECIAL TEST FEATURES | FINISH: THE GENERAL EXTERIOR FINISH OF THE FILTER SHALL BE 1 COAT OF MIL-P-53022, TYPE II, EPOXY PRIMER AND 2 COATS OF MIL-PRF-85285, TYPE II, POLYURETHANE ENAMEL APPLIED PER PS 13630; ALTERNATELY THE FINISH MAY CONSIST OF 1 COAT OF MIL-P-23377 EPOXY PRIMER AND 2 COATS OF MIL-C-83286 POLYURETHANE ENAMEL APPLIED PER PS 13630; COLOR SHALL BE WHITE; COLOR NUMBER 17925 PER FED-STD-595 |
| BODY OUTSIDE DIAMETER | 3.226 INCHES MAXIMUM IN |
| TEMP RATING | -40.0 FAHRENHEIT MINIMUM AND 220.0 FAHRENHEIT MAXIMUM DEGF |
| BODY HEIGHT | 6.650 INCHES MAXIMUM IN |
| SUPPLEMENTARY FEATURES | APPROXIMATE UNIT WEIGHT: 2.20LBS LBS |
| DIFFERENTIAL PRESSURE | ERR-060 |
| SPECIAL FEATURES | OPERATING ALTITUDE: SEA LEVEL TO 70,000 FEET; RATED FLOW: 7.25 GPM AT 4.5 PSID MAXIMUM WITH CLEAN ELEMENT AT 70 DEGREES FAHRENHEIT; FLUID MEDIA: COOLANT FLUID PER BOEING-ST LOUIS MATERIAL SPECIFICATION MMS 654; FILTER ASSEMBLY RELIEF VALVE: CRACKING PRESSURE: 9 PSID, + OR - 1; LEAKAGE UP TO 7.2 PSID SHALL NOT EXCEED 4CC PER MINUTE; RATED FLOW SHALL OCCUR AT A PRESSURE DIFFERENTIAL BETWEEN INLET AND OUTLET PORTS NOT EXCEEDING 14.4 PSI; RELIEF VALVE RESEAT PRESSURE SHALL BE 5.8 PSI OR ABOVE; OPERATING PRESSURE: 150PSIG; PROOF PRESSURE: 225 PSIG; BURST PRESSURE: 375 PSIG; ELEMENT DIFFERENTIAL: 180 PSIG, NO COLLAPSE OR PERMANENT DEFORMATION FT |
| SURFACE TREATMENT | ENAMEL BODY |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FILTER, FLUID, LIQUID COOLING SYSTEM |